2001 caldina 4thgen 3sgte Options

[tangcla]

i was told you can upgrade the turbo...

you can, just need to replace the manifold first.

Not if you get a Blitz K1-380V which is a bolt-on upgrade to the CT26/CT20b

[presure2]

i was told you can upgrade the turbo...

you can, just need to replace the manifold first.

Not if you get a Blitz K1-380V which is a bolt-on upgrade to the CT26/CT20b

thing is, the 4th gen 3sgte manifold is PART of the turbo exhaust housing.
theres nothing to unbolt and bolt that to.
again, you need to replace the factory manifold 1st.

[manphibian]

I got a 4th gen 3SGTE St215 and I'm curently swapping it in my ST184. I upgraded my turbo to a T3/T4 unit. To do this, I used a ST205 SSAC exhaust manifold, a modified SSAC downpipe, and the XS-power T3/T4 adaptor with a 38 mm wastegate flange. Everything is fine, but the downpipe is really near the radiator and the turbo compressor outlet too. I'll need to buy some slim fan (if you can post a link to a good slim fan, you will help me a lot).

I'll post pics of the swap when It will be complete. Maybe next week.

Thanks

Sam

Could you put the regular fan on the other side of the radiator maybe????? IDK

[pitcelica]

Hi, for your information manphibian, the stock fan can't be use on the driver side. And I can't put it on the passenger side because my downpipe hit it. So, for now, I bypass the fan signal to my a/c fan. It won't be the best but it will work. I think that I will buy a slim fan and put it in the passenger side.

And for the pics, easternpiro1, my swap isn't complete now, i need to build a braket for a sensor and to finish my intercooler piping. But as soon as it's complete, I'll post pics everwhere!!!