 What is the optimal location for an EGT Tap?, Which runner would be the best? |
 May 3, 2007 - 1:24 PM
|
 
|
 Enthusiast  Joined Mar 29, '06 From Regina, SK, Canada Currently Offline Reputation: 38 (100%)  |
So I am wondering what would be the best runner to get tapped to install an EGT probe. I think I read somewhere that on the 5SFE runner number 4 tends to run lean due to the design, or something like that. If that is the case I would imagine that it would be the one that may have higher temperatures and therefore it should go in there.
Just wondering what your thoughts are for which would be the hotest and therefore optimal one to get tapped for an EGT probe. Also, I have shown Manny's picture of his manifold and am hoping you can let me know which runners are what number. Manny, which runner did you tap (is that #2) and would you pick a different one if you were to do it again? 
This post has been edited by WALKER: May 3, 2007 - 1:25 PM -------------------- |
Posts in this topic
WALKER What is the optimal location for an EGT Tap? May 3, 2007 - 1:24 PM
Negative That's the number 3. I can't add anymore. May 3, 2007 - 1:28 PM lagos runner 3 is the place to be. just like manny did i... May 3, 2007 - 1:28 PM presure2 #3, nice and close to the head. May 3, 2007 - 3:57 PM
Bitter whichever runs the leanest, so look for the whites... May 3, 2007 - 8:53 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: July 25th, 2025 - 7:41 PM |