 dirty dirty brakes, cleaning them, well |
 Aug 11, 2003 - 3:56 PM
|
 
|
 Enthusiast  Joined Aug 29, '02 From ny to philly Currently Offline Reputation: 0 (0%)  |
okay so I've cleaned my brakes. I used a wire brush on the drums, sanded them with wet dry paper, and then I used rustoleum high temp spray paint on them. but, after 2 weeks they are already flaking and looking bad again. my question is, how can I make them look good permanently (or atleast for the better part of a year)?
... and don't tell me to go out and buy new rotors or do a conversion. I'm planning on it, but everything has a time and a place. and next spring is the time, not now 
|
Posts in this topic
ghostdog dirty dirty brakes Aug 11, 2003 - 3:56 PM
Junior When you paint them, use a high temp. paint. That... Aug 11, 2003 - 11:25 PM macavely did you use a high temp clear coat? Aug 11, 2003 - 11:52 PM ghostdog QUOTE (Junior @ Aug 11, 2003 - 11:25 PM) When... Aug 12, 2003 - 12:15 AM SpedToe169 The wire brush isn't enough. You really need ... Aug 12, 2003 - 12:39 AM SiKBOY did you use any primer? Aug 12, 2003 - 6:23 AM Junior Its okay ghost dog, you can be an ass. But I was ... Aug 12, 2003 - 11:18 AM 97GTinKC One trick I have learned when painting parts, is t... Aug 12, 2003 - 12:41 PM
ghostdog thanks for the replies all. I was worried that I h... Aug 12, 2003 - 4:35 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: September 15th, 2025 - 7:23 AM |