 ACT Hybrid Clutch Part Number, Custom Made 6-Puck Sprung Clutch |
 Oct 13, 2007 - 3:19 AM
|
 
|
|
Enthusiast  Joined May 4, '07 From Beaumont Currently Offline Reputation: 2 (100%)  |
I just got my special order ACT 6-Puck Sprung Hybrid clutch. This allows the GT transmission to mate with the ST205 3sgte. I know that there has been problems with the SPEC hybrid clutch, so if you would like to try ACT, all you have to do is call them and give them the part number. Its a new number, this is the first time they have made this disc. The disc is rated for 400-500 torque. KO Racing uses the ACT plates for their high horsepower applications, with very good results. All ACT products are made in house and are very high quality. Once installed and broke-in I will give my review.
6236216 - ACT 6-Puck Disc - $180.00 http://www.advancedclutch.com T023 - ACT Heavy Duty Pressure Plate - $256.00 http://www.autocom.com/catalog AT17 - ACT Alignment Too - $5.00 http://www.advancedclutch.com 31230-32060 - OEM Release Bearing - $38.00 http://www.1sttoyotaparts.com It would be nice to sticky or put this info somewhere so everyone has a chance to read it. |
 |
Replies
(1 - 6)
|
Oct 15, 2007 - 7:53 PM
|
|
|
Enthusiast Joined May 4, '07 From Beaumont Currently Offline Reputation: 2 (100%) |
Does no one care about this?
|
|
Oct 16, 2007 - 12:36 PM
|
|
 Enthusiast Joined Oct 10, '03 From Wichita, KS Currently Offline Reputation: 5 (100%) |
Cool. Should work for 2nd gen 3SGTE as well. Is the clutch disc the spring centered or a solid hub design?
--------------------  Project ST204.5 99.88946% complete... |
|
Oct 16, 2007 - 3:32 PM
|
|
|
Enthusiast Joined May 4, '07 From Beaumont Currently Offline Reputation: 2 (100%) |
Yes, its sprung as I said and it will work on a 2nd gen.
|
|
Oct 16, 2007 - 9:59 PM
|
|
|
Enthusiast Joined Jan 17, '04 From Illinois Currently Offline Reputation: 0 (0%) |
QUOTE(PhilipK @ Oct 16, 2007 - 3:32 PM) [snapback]605518[/snapback] Yes, its sprung as I said and it will work on a 2nd gen. Sprung or unsprung will work with any 3sgte - its a matter of torque holding capacities and drivability. -------------------- QUOTE(lagos @ Jul 10, 2006 - 1:55 PM) [snapback]454118[/snapback] i know your trying to do the right thing for your motor, but this is one of those times where you should just trust the guys who have had their swaps for a while and have done a ton of research into this. |
|
Oct 16, 2007 - 10:02 PM
|
|
 Enthusiast Joined Aug 31, '02 From Philadelphia, PA Currently Offline Reputation: 8 (100%) |
unsprung = teh suck.
-------------------- 15PSI - 30MPG - Megasquirt Tuned
|
|
Oct 16, 2007 - 10:19 PM
|
|
|
Enthusiast Joined Jan 17, '04 From Illinois Currently Offline Reputation: 0 (0%) |
QUOTE(lagos @ Oct 16, 2007 - 10:02 PM) [snapback]605659[/snapback] unsprung = teh suck. For a street application, they are more difficult to modulate. However, they won't have a tendency to chatter like some sprung clutches (e.g. spec) and are the next step up when sprung clutches won't cut it due to power levels. It all depends on your application. If I were getting another sprung clutch, it would be clutchmasters for sure. Everything that I have read about Act is that they are solid, good products but have a much stiffer pedal feel. I can't speak for others, but having a stock-like pedal feel is important to me in a street car. -------------------- QUOTE(lagos @ Jul 10, 2006 - 1:55 PM) [snapback]454118[/snapback] i know your trying to do the right thing for your motor, but this is one of those times where you should just trust the guys who have had their swaps for a while and have done a ton of research into this. |
 |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: September 20th, 2025 - 6:34 PM |