 boost gauge tap point, read the forums...ended up tapping in here. |
 Nov 16, 2007 - 8:36 PM
|
 
|
 Enthusiast  Joined Aug 7, '05 From Columbus OH Currently Offline Reputation: 3 (100%)  |
I want to make sure this is an ok place to tap into for my boost gauge. This is a jdm 3sgte st205 and I'm currently tapped into the line that goes into my BOV. I tried tapping into the line suggested on the st205 repair / maintance sticky, but had limited results. I'm currently reading -15 at idle. It increases through the gears, but really jumps in 3rd to 18psi when I get on it. Just want to make sure this is an ok place and these readings are ok. Pardon the tape...it's temperary for now. Thanks for you help.
--------------------  |
Posts in this topic
CELL_PROTOTYPE_X boost gauge tap point Nov 16, 2007 - 8:36 PM
CaliJeff as long as u use one of the t's, and its secur... Nov 16, 2007 - 9:40 PM 6strngs I dunno about the 3sgte, but the 5sfe has little n... Nov 17, 2007 - 8:11 PM beno look here
http://www.6gc.net/forums/index.php?sho... Nov 24, 2007 - 12:39 AM toyotacrazy Is that a plastic T? If so it may melt on hot sum... Nov 29, 2007 - 6:13 PM
CELL_PROTOTYPE_X Oh thanks for the advice...it is a plastic one. Mi... Nov 29, 2007 - 6:32 PM OOBE You should. Nov 29, 2007 - 8:30 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: December 21st, 2025 - 11:37 AM |