Check Engine Light, Air Flow Issue Options

[Havok1997GT]

Guys, i need help with this one, cuz im lost. My GT is giving me a Check Engine light, The read out says something like Inadequate Air Flow. Ive done a complete Wash of my Intake. I had my Tech that i go to for tools i dont have, and he said he check all the Sensors and said they all worked fine. Ive Reset the ECU 3 times now. After the Bath of the intake i got 160 miles before it went off again. Thinking it was a faulty read i reset again and got 124 miles before the light came back. Now the Next part is going to be a little hard to explain. On the Intake (After Market Intake) right after the Filter connects to the tube is a sensor. I think its either the Mass Air Flow or the Air Temp Sensor, or something. The grommet was so tore from age that it wasnt holding the sensor in place anymore and it was just kinda hanging from the Tube. I went to get a new grommet for the sensor and they didnt have any the size i needed so i got a few different sizes and rigged 2 together. Basically the issue was one was the right size for the hole in the Tube but to big to fit the Sensor and the other fit the sensor but not in the Tube. So i rigged it up so it will fit and stay sealed, way better then what it was anyways. The thing is though after that i did the final Reset of the ECU and i got 8 miles before the Light came back on. IM LOST!!!!!!!!!!! if you have any ideas help me out. Im still working on a few things but i need all the help i can get.

Thanks