![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Jan 13, '06 From UnderTheGround403 Currently Offline Reputation: 2 (100%) ![]() |
Can anybody tell me what kind of oxygen sensor this is, and what type of car/engine it is used for?
I have a 98 celica chassis with a jdm 93 sw20 3sgte swapped in. I ordered a replacement o2 sensor for a 93 mr2t, figuring the ecu would need a 93 3sgte sensor. Well my replacement sensor has 4 wires, and the clip has 4 electrical contacts. The one currently installed has 1 wire w/ 1 contact. I searched online, but it looks like the 5sfe uses a 2 wire sensor, so what do I have? edit: I did a bit of searching on mr2oc, and it seems that the OEM replacement IS indeed a 4-wire sensor, but there have been a few other members that have 93 jspec 3sgte's that came with 1-wire o2 sensors, so now I'm not sure if I should be looking for...a 1-wire 5sfe sensor or a 1-wire 3sgte sensor. I don't know why toyota would put different sensors between USDM and JDM 3sgte motors though (assuming that the sensors are OEM). Does anybody have any experience with universal sensors? ![]() ![]() This post has been edited by 6gsillyca: May 8, 2008 - 10:23 PM |
![]() ![]() |
Lo-Fi Version | Time is now: June 25th, 2025 - 4:03 PM |