![]() |
![]() ![]() |
![]() |
![]() |
|
Enthusiast ![]() Joined Jul 31, '08 From Lansing Currently Offline Reputation: 0 (0%) ![]() |
So, after going to the Woodward Dream Cruise, I decided I gotta do a few things here 'n there to make my Celica MY Celica. I've been huntin' for many parts but have had little luck.
My next item on my agenda: GET RID OF THE YELLOW. I want clear markers, clear corners, or even some better tail lights. Does anyone have some handy pictures of the JDM tails that would fit on a '95 ST liftback? I think I have seen some pics but I don't know that 100% (honestly, when I looked at the pics I saw, I couldn't understand what made them much different than the USDM). I also can't seem to find clear corners or clear side markers. Ms. GriffGirl definitely pointed me to some clear corners but they show the bulb and to me, it looks a little tacky. Anyone have some good suggestions? -------------------- digitalctrl
Lansing Computer Repair Laptop Repair Geek Squad Alternative Don't hate me...I'm a friendly n00b. :) |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined Apr 15, '07 From Fort Worth, TX Currently Offline Reputation: 12 (100%) ![]() |
The standard JDM tails you see for the hatches will fit your car.
|
![]() |
|
![]() Enthusiast ![]() ![]() Joined Nov 21, '05 From England Currently Offline Reputation: 6 (100%) ![]() |
Here's an old thread relating to removing the ginger insert on the JDM rears- best finished off with a silver bulb for full effect
http://www.celica-club.co.uk/forum/index.php?showtopic=19374 Clear side repeaters(crystal type) I believe are easily available, and if yours is a pre face lift model, for the fronts you might like these.. ![]() ![]() -------------------- Has your car ever been on T.V? Mine was used in the opening sequences here - note the clear turns and front LED's
http://videos.streetfire.net/video/Wheeler...11-9c0f00a0b820 |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Jun 30, '03 From O-town, FL Currently Offline Reputation: 0 (0%) ![]() |
wolfie, you make those right? still doing it?
-------------------- |
![]() |
|
Enthusiast ![]() Joined Jul 31, '08 From Lansing Currently Offline Reputation: 0 (0%) ![]() |
So I definitely like those clear corners and they are definitely what I had in mind. But it's finding them that's hurtin' me... Where can they be found?
Anyone have some good pics of the JDM tails? I saw a set on eBay but as I said, they didn't really seem that much different than the USDM and thus, not really something that a lot of people would have if there was little change. -------------------- digitalctrl
Lansing Computer Repair Laptop Repair Geek Squad Alternative Don't hate me...I'm a friendly n00b. :) |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined Jun 2, '08 From Fort Worth, Texas Currently Offline Reputation: 9 (100%) ![]() |
how much are the clear corners for the 94-95 in us dollars
-------------------- ![]() |
![]() |
|
![]() Enthusiast ![]() ![]() Joined Nov 21, '05 From England Currently Offline Reputation: 6 (100%) ![]() |
wolfie, you make those right? still doing it? Yep, I'm the man, and yes I still make them on a regular basis. Currently available from stock at £67.50 GBP inc amber bulbs, plus £2.50 to cover Air Mail post. -------------------- Has your car ever been on T.V? Mine was used in the opening sequences here - note the clear turns and front LED's
http://videos.streetfire.net/video/Wheeler...11-9c0f00a0b820 |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Sep 29, '02 From Sterling Heights, Michigan Currently Offline Reputation: 0 (0%) ![]() |
Anyone have some good pics of the JDM tails? I saw a set on eBay but as I said, they didn't really seem that much different than the USDM and thus, not really something that a lot of people would have if there was little change. USDM tails. Sorry not a direct shot of the back. ![]() And JDM tails ![]() You can clearly see the difference between the 2. Hope this helps supaneko. ![]() Oh, where abouts are you from in MI? -Christee- |
![]() |
|
![]() Moderator ![]() ![]() ![]() ![]() ![]() Joined Oct 13, '06 From UK Currently Offline Reputation: 6 (100%) ![]() |
wolfie, you make those right? still doing it? Yep, I'm the man, and yes I still make them on a regular basis. Currently available from stock at £67.50 GBP inc amber bulbs, plus £2.50 to cover Air Mail post. = just over $130 US As i know you lot struggle if anything is listed in another currency ![]() -------------------- |
![]() |
|
Enthusiast ![]() ![]() Joined Apr 18, '08 From Oakland, bay area, California Currently Offline Reputation: 1 (100%) ![]() |
thats sooo expensive lol i was looking at that too...
why not just get a facelift bumper ![]() |
![]() |
|
![]() Enthusiast ![]() ![]() Joined Nov 21, '05 From England Currently Offline Reputation: 6 (100%) ![]() |
wolfie, you make those right? still doing it? Yep, I'm the man, and yes I still make them on a regular basis. Currently available from stock at £67.50 GBP inc amber bulbs, plus £2.50 to cover Air Mail post. = just over $130 US As i know you lot struggle if anything is listed in another currency ![]() ![]() ![]() ![]() ![]() -------------------- Has your car ever been on T.V? Mine was used in the opening sequences here - note the clear turns and front LED's
http://videos.streetfire.net/video/Wheeler...11-9c0f00a0b820 |
![]() |
|
Enthusiast ![]() Joined Jul 31, '08 From Lansing Currently Offline Reputation: 0 (0%) ![]() |
Aha! So it looks like the JDM tails are definitely something I was looking for (looks like the turn signal portion is clear?).
And where in MI am I? Walled Lake. Not too far from you, sir. ![]() Wolfie, I would like to take you up on your offer. Can you ship to the US? Paypal will convert the currency, I do believe. ![]() EDIT: So the price is a bit steep, but would these fit on my car? JDM ST205 Tail Lights This post has been edited by supaneko: Aug 19, 2008 - 11:48 PM -------------------- digitalctrl
Lansing Computer Repair Laptop Repair Geek Squad Alternative Don't hate me...I'm a friendly n00b. :) |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Feb 28, '07 Currently Offline Reputation: 1 (100%) ![]() |
yes they would fit....
-------------------- BANNED. for life, you moron.
|
![]() |
|
![]() Enthusiast ![]() ![]() Joined Nov 21, '05 From England Currently Offline Reputation: 6 (100%) ![]() |
Aha! So it looks like the JDM tails are definitely something I was looking for (looks like the turn signal portion is clear?). And where in MI am I? Walled Lake. Not too far from you, sir. ![]() Wolfie, I would like to take you up on your offer. Can you ship to the US? Paypal will convert the currency, I do believe. ![]() EDIT: So the price is a bit steep, but would these fit on my car? JDM ST205 Tail Lights I've P.M'd you payment details ![]() -------------------- Has your car ever been on T.V? Mine was used in the opening sequences here - note the clear turns and front LED's
http://videos.streetfire.net/video/Wheeler...11-9c0f00a0b820 |
![]() |
|
![]() Enthusiast ![]() ![]() Joined Nov 21, '05 From England Currently Offline Reputation: 6 (100%) ![]() |
Just a wild thought......In the last few days I've made some sets of clear USDM style front side repeaters for the Supra MK3 and was wondering whether by any slim chance they're the same size a the Gen 6.
The dimensions of the lenses are 144mm x 30mm.... ![]() ![]() -------------------- Has your car ever been on T.V? Mine was used in the opening sequences here - note the clear turns and front LED's
http://videos.streetfire.net/video/Wheeler...11-9c0f00a0b820 |
![]() ![]() |
Lo-Fi Version | Time is now: July 26th, 2025 - 10:26 PM |