6G Celicas Forums

Welcome Guest ( Log In | Register )

6 Pages V  « < 4 5 6  
Reply to this topicStart new topic
> 3S-GE ACIS/Beams discussion, Discussion about ACIS, TVIS, VVT-i, etc. applicable to 3S-GE motors
post Feb 10, 2016 - 3:04 AM
+Quote Post
Rusty



Moderator
*****
Joined Nov 5, '07
From New Zealand
Currently Offline

Reputation: 3 (100%)




Sounds like you're splitting hairs 0.8PS (Pferdestärke) is 0.8HP or 0.588kw. Also 15-11=8.82 just stick to 1 form of measurement


Did you ever get your Celica dyno'd Bonzai to see what your base power is and go from there? So you know roughly what your gains are when you do buy & install some parts for your beams.

When I installed the Tom's ecu I got a print out of the O2 readings from the exhaust. No since we have never had some sort of smog checking, I can't really compare my results to others locally. Would be interesting to compare - if it is comparable, to people in the States


--------------------
post Feb 10, 2016 - 2:21 PM
+Quote Post
BonzaiCelica



Enthusiast
*****
Joined Apr 24, '08
From Orange County, CA
Currently Offline

Reputation: 33 (100%)




Nope. I don't plan to do any dyno unless it's real cheap. And adding other engine parts isn't realistic. Got other plans. I was just putting the info so people know what to expect. With a full system.

Oh yea sorry. I just fixed that post ��

This post has been edited by BonzaiCelica: Feb 10, 2016 - 2:28 PM


--------------------
post Jun 16, 2016 - 3:24 AM
+Quote Post
BonzaiCelica



Enthusiast
*****
Joined Apr 24, '08
From Orange County, CA
Currently Offline

Reputation: 33 (100%)




Not a new product or anything. But companies like technotoytuning and battle garage offer individual throttle body set up for beams motors that's actually compatible with 4age blacktop. Im just not sure if a whole kit is bolt on per say.


--------------------
post Mar 24, 2017 - 2:30 PM
+Quote Post
BonzaiCelica



Enthusiast
*****
Joined Apr 24, '08
From Orange County, CA
Currently Offline

Reputation: 33 (100%)




Camshafts for 3SGE ACIS and Beams Redtop. someone from south africa told me it was $1200 + shipping, but came with springs and retainers.

http://www.catcams.com/engines/engine-sele...Manufacturer=26

Dry Sump Oil Pan for 5sfe and 3sge = $600
http://www.mr2.com/forums/threads/94399-dr...e-3sgte-as-well

Wossner High Compression Pistons 12:4.1 = $1200.

they have a branch here in Southern California....

https://www.ebay.com/itm/WOSSNER-FORGED-PIS...v-/140508110953

3SGE Beams ITB adapter plate $285, the problem is that i dont think straight trumpets will work. i think they have to be slightly angled @ 60 degrees to clear firewall.....

https://xcessivemanufacturing.com/toyota/by...ge-itba-s1.html

This post has been edited by BonzaiCelica: Nov 25, 2017 - 7:16 PM


--------------------
post Jul 15, 2017 - 12:23 AM
+Quote Post
BonzaiCelica



Enthusiast
*****
Joined Apr 24, '08
From Orange County, CA
Currently Offline

Reputation: 33 (100%)




updates on performance parts for 3SGE

This post has been edited by BonzaiCelica: Nov 25, 2017 - 7:11 PM


--------------------
post Nov 25, 2017 - 7:11 PM
+Quote Post
BonzaiCelica



Enthusiast
*****
Joined Apr 24, '08
From Orange County, CA
Currently Offline

Reputation: 33 (100%)




bump. for tuning parts....


--------------------
post Dec 13, 2017 - 5:05 AM
+Quote Post
BonzaiCelica



Enthusiast
*****
Joined Apr 24, '08
From Orange County, CA
Currently Offline

Reputation: 33 (100%)




The camshafts that can be used while still retaining VVT-i are these.....

http://www.catcams.com/products/camshafts/...AMSETUP_id=2410

Please note that you have to check the lower valve seat if the lift is
more then 11.2 mm
Also check the clearance between the valve seal and the retainer like
mentioned on the data sheet.

You also have to change the springs and retainers to use this cams.


--------------------
post Sep 11, 2018 - 6:43 PM
+Quote Post
BonzaiCelica



Enthusiast
*****
Joined Apr 24, '08
From Orange County, CA
Currently Offline

Reputation: 33 (100%)




QUOTE (BonzaiCelica @ Aug 20, 2009 - 1:13 AM) *
ok so i gathered some info from the beams redtop forums. all prices are American Dollars.

Total for Individual Throttle Bodies $2,226.42 (this includes center pull linkage, tps, gasket, bolts etc.)


Cast Throttle Bodies

Sizes offered in 45, 48, and 50mm


Custom Independent Throttle Body Adapter
Offered in 45mm, 48mm, and 50mm
Made by TRD



Pistons, Size = 86mm, 86.5mm, and 87mm


Compression Ratio = 12.8:1 can be ran best with 98 RON = 93 Octane Fuel or 13.8:1 can be ran best at 100 RON = 94 octane Fuel
Rings Included
Wrist Pins Included


Rod and Rod Bolts $1236.90
8mm longer than Standard Rods
Rod Ratio = 1.7
ARP Rod Bolts included


Set of 4 Inlet Billet Cam $1030.75, Cams $412.30
Lift = 13mm
Duration - 257
Intake Cam is VVT-I enabled


Valve Springs $618.45



so Celica RA45 over in Australia is still making these parts to order for the redtop motor. head over to beams owners group forum on mr2 board if your interested

This post has been edited by BonzaiCelica: Sep 11, 2018 - 6:44 PM


--------------------
post Sep 12, 2018 - 6:16 PM
+Quote Post
Rusty



Moderator
*****
Joined Nov 5, '07
From New Zealand
Currently Offline

Reputation: 3 (100%)




While over the ditch, NZ make these custom ones...

They can do 45mm, 48mm or 50mm






Not sure on price. But gen 3 owners could use their lower intake runners, and possibly a small adaptor bracket between that and the itb's


--------------------
post Sep 12, 2018 - 8:20 PM
+Quote Post
BonzaiCelica



Enthusiast
*****
Joined Apr 24, '08
From Orange County, CA
Currently Offline

Reputation: 33 (100%)




the adapter that Celica RA45 makes is for the MR2 sw20 because the design is straight out and i know they cut into the truck to accommodate clearance issues.

but good thing you added that cause look at these that were sourced from the guy in South Africa. I think this is a 120 degree angle, but only because it was fitted into a newer corolla that originally had an 1ZZ motor. While the one you picture looks like a 90 degree bend.

IMG-20171130-WA0003 by Justin Towers, on Flickr
IMG-20171130-WA0001 by Justin Towers, on FlickrIMG-20171109-WA0001 by Justin Towers, on Flickr
IMG-20170306-WA0005 by Justin Towers, on Flickr

pics of how cat cams come in the mail

IMG-20180329-WA0004 by Justin Towers, on Flickr

This post has been edited by BonzaiCelica: Sep 12, 2018 - 9:30 PM


--------------------

6 Pages V  « < 4 5 6
Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: December 15th, 2018 - 2:48 PM