 issues after wiring up jdm side markers |
 Sep 17, 2008 - 5:27 PM
|
 
|
 Enthusiast  Joined Jan 29, '07 From Hoyt Lakes, MN Currently Offline Reputation: 11 (100%)  |
The side markers had a white wire w/ black strip and a green wire. So I figured I'd wire up the white/blackstrip wire to the white/ black strip on the turn signals. Well now the issue is, the side markers and turn signals turn on no problem, but when I use the turn signals, I get nothing. They just stay on. And then when I took off the wires connected to the side markers and tried to use the turns, I get the same problem. They just stay on. But when I use my hazards it blinks without any issues.
-------------------- 98 Celica gt red- totaled deer
94 Celica st black DD (bad weather beater)- totaled deer 95 Celica gt silver- chassis sold 88 Celica All-Trac (Burned to a crisp) 94 Celica gt white (sold) In need of a rust free chassis!!!! |
Posts in this topic
bccentaur3 issues after wiring up jdm side markers Sep 17, 2008 - 5:27 PM
mneal2_92788 so these are teh ones on the fender? if so they do... Sep 17, 2008 - 6:02 PM bccentaur3 close thread. I tested this without the key in the... Sep 17, 2008 - 6:03 PM
azian_advanced ok nvm Sep 17, 2008 - 6:09 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 23rd, 2025 - 3:40 PM |