 Help: Car alarm's immobilizer is activated, can't start my car |
 Oct 19, 2008 - 9:01 PM
|
 
|
|
Enthusiast  Joined Aug 22, '07 From Burnaby, British Columbia, Canada Currently Offline Reputation: 8 (100%)  |
I have a Clifford Alarm, Cyber 3.
So what happened was my key fob ran out of batteries so i went to get a replacement. After putting it in the car was unresponsive to the remote (I made sure the battery was put in the right way). I was able to drive but was unable to remote lock/unlock or activate my alarm. So i figured..try taking out the wires to the alarms computer. Put them back in, the alarm goes off...remote continues to be of no use...so i try taking out the negative terminal of my car battery figuring it would reset my alarm system and i'd be good to go...just my luck..it activated my immobilizer and now i can't even start the car. Every time i open the door, the alarm goes off for about a cycle. I tried the manual instructions found at: (Click Me) Went through the "User selectable features" on pg. 13....no luck Anyone here can help me with this? My car is a sitting duck in a not so great neighborhood =( (on the brighter side, at least if someone tries to steal it, they will have no luck haha) This post has been edited by nammer: Oct 19, 2008 - 9:02 PM -------------------- |
Posts in this topic
nammer Help: Car alarm's immobilizer is activated Oct 19, 2008 - 9:01 PM
Hanyo you have to add the remote to your car alarm and e... Oct 20, 2008 - 6:22 AM nammer I tried those steps on page 13/14 and still nothin... Oct 20, 2008 - 4:34 PM nammer anyone have other suggestions for me? Oct 21, 2008 - 4:12 PM samir0189 I read on page 10, under Selectable starter/igniti... Oct 21, 2008 - 8:22 PM
nammer yaa..that's what it seems like i did...well to... Oct 22, 2008 - 1:08 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: January 15th, 2026 - 4:14 PM |