![]() |
![]() ![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Dec 26, '09 From Albuquerque, NM Currently Offline Reputation: 19 (100%) ![]() |
-------------------- taking too long to mod since '09
June '12 COTM '95 AT200 |
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Dec 29, '05 From So-Cal Currently Offline Reputation: 12 (100%) ![]() |
what was the tool you use to open up that steering wheel...nice!
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 13, '08 From Australia Currently Offline Reputation: 7 (100%) ![]() |
Open up my steering whee? Uhhh its stock. It came like that from factory.
Might as well dump some photos here too. ![]() ![]() This post has been edited by whatthe: Dec 1, 2010 - 10:41 PM -------------------- |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 13, '08 From Australia Currently Offline Reputation: 7 (100%) ![]() |
The weekend changed my transmission oil after 25,000km of usage and put in castrol manual vmx80. Started taking off mods to putting money aside for my boosted car.
Spent some time just then cleaning the interior. Vacuumed and wiped down all leather bits (door sides, steering wheel, dash, handgrip, back of the seats) with this. ![]() ![]() ![]() This post has been edited by whatthe: Dec 5, 2010 - 10:00 PM -------------------- |
![]() |
|
![]() Enthusiast ![]() ![]() Joined Mar 3, '08 From New Zealand Currently Offline Reputation: 1 (100%) ![]() |
very clean as always mate
![]() ![]() -------------------- ![]() _______________May COTM 2011_______________ |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Apr 24, '08 From Orange County, CA Currently Offline Reputation: 33 (100%) ![]() |
nice interior. You need the 3 post with red stitching steering wheel. I really like that White TRD shift knob. Kinda a shame you didn't get full leather door panels
![]() -------------------- Group buy to replicate Narrow E series transaxle parts
http://www.6gc.net/forums/index.php?showto...p;#entry1107514 |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Feb 11, '08 From Auckland, New Zealand Currently Offline Reputation: 0 (0%) ![]() |
U need a set of these
![]() ![]() -------------------- Mike W
1996 Toyota Celica ST205 GT-FOUR GT2860RS turbine, TiAL mvr44, JE 86.5φ piston, Clutchmasters FX400, APEX P-FC 269awhp / 273ft-lbs |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 13, '08 From Australia Currently Offline Reputation: 7 (100%) ![]() |
^ Yeh i just sold my set of those
![]() This post has been edited by whatthe: Dec 6, 2010 - 8:49 AM -------------------- |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Dec 26, '09 From Albuquerque, NM Currently Offline Reputation: 19 (100%) ![]() |
nice interior. You need the 3 post with red stitching steering wheel. I really like that White TRD shift knob. Kinda a shame you didn't get full leather door panels ![]() I actually really, REALLY like how Rico's door cards are cloth. I dunno why, I just think it looks way better than the normal leather... or leather-ish material. Lol -------------------- taking too long to mod since '09
June '12 COTM '95 AT200 |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined May 10, '10 From MA Currently Offline Reputation: 37 (100%) ![]() |
nice interior. You need the 3 post with red stitching steering wheel. I really like that White TRD shift knob. Kinda a shame you didn't get full leather door panels ![]() I actually really, REALLY like how Rico's door cards are cloth. I dunno why, I just think it looks way better than the normal leather... or leather-ish material. Lol I have cloth door cards as well. It's starting to fall off, but I'm going to respray adheasive on them so they won't sag. |
![]() |
|
![]() Moderator ![]() ![]() ![]() ![]() ![]() Joined Jun 29, '08 From Denver Currently Online Reputation: 59 (100%) ![]() |
I have cloth door cards as well. It's starting to fall off, but I'm going to respray adheasive on them so they won't sag. I had cloth door cards and once they started to fall off, they were off. I sprayed a cheap adhesive on there and it wouldn't hold so I upgraded to 3M adhesive and nothing worked. It would hold for a day then sag again. I eventually had to take them off altogether. Let us know if you find something that actually works. I'm sure I could have found a product that would have worked, but I didn't feel like wasting any more money on the car. Rico, as always, great car and great photography! -------------------- "Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us to use the search button!
![]() 2006 Aston Martin V8 Vantage. 1998 Celica GT- BEAMS Swapped. 2022 4Runner TRD Off Road Prenium. 2021 GMC Sierra AT4. |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 13, '08 From Australia Currently Offline Reputation: 7 (100%) ![]() |
Last night when for a nice drive with some friends. Probably the first drive i had with the thicker rear sway bar. Car felt alot stable through corners giving me alot! more confidence smashing through each corner. I could definately feel the sway bar doing its thing at turns i get little to no understeer or oversteer only where i want the car to go. So none of this oh ****! o.O
Anyways made me fall in love with the car again :3 -------------------- |
![]() |
|
Enthusiast ![]() ![]() ![]() Joined Feb 2, '06 Currently Offline Reputation: 3 (100%) ![]() |
Rear swaybar changes the whole feeling of the car, first time I went for a drive with it, back slid out round the corner. None of this plough understeer!
By the way, which setting do you have it on? Middle or the highest one? This post has been edited by NGHTKD: Dec 8, 2010 - 10:28 PM |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 13, '08 From Australia Currently Offline Reputation: 7 (100%) ![]() |
Middle atm. Dont want to put on hardest from what Euphoria said. That you get oversteer with hard. And i would **** myself sideways if i snapped into oversteer again lol.
-------------------- |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 13, '08 From Australia Currently Offline Reputation: 7 (100%) ![]() |
FAPFAPFAP
![]() -------------------- |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Oct 7, '09 From Northern kentucky Currently Offline Reputation: 8 (90%) ![]() |
^^^^^ NO NO NO NO!!!!!! You know the rules no porn on the site lol....... car looks great though, you running the 25mm spacers in this pic?
-------------------- 1996 Toyota Celica Project Mean Green
3RD Gen 3SGTE WRC Edition W/LSD E153 - Love BOOST <3 2001 Solar yellow Lexus IS300 2001 Dodge ram 1500 Off-road edition |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 13, '08 From Australia Currently Offline Reputation: 7 (100%) ![]() |
Yeh man 25mm spacers all round. Do it you cant go wrong.
-------------------- |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Oct 7, '09 From Northern kentucky Currently Offline Reputation: 8 (90%) ![]() |
I know you had to roll your rear quater panels, but what about the front? any rubbing going on with the plastic fender gaurd
-------------------- 1996 Toyota Celica Project Mean Green
3RD Gen 3SGTE WRC Edition W/LSD E153 - Love BOOST <3 2001 Solar yellow Lexus IS300 2001 Dodge ram 1500 Off-road edition |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 13, '08 From Australia Currently Offline Reputation: 7 (100%) ![]() |
Na it should be fine. Mines sitting a tad higher at the front to even have the tyre meeting the fender when its running over bumps. Since my gutter tomy driveway is ****tty and i dont want to fcuk up my fiberglass splitters. Even if it was lower it should be fine.
I ran super flush before with my 17" and they were homo gay. I was scrubbing on the passenger back and both my fronts tyres were constantly getting sliced. This was with my coilovers full hard. The car was no fun, i had to drive like a little girl and every corner was a fcuking challenge. I was probably doing it wrong, having not a cool setup. But im over it, i like my setup now. Looks good and dont have to worry about the road conditions. This post has been edited by whatthe: Dec 9, 2010 - 9:38 AM -------------------- |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Oct 7, '09 From Northern kentucky Currently Offline Reputation: 8 (90%) ![]() |
Hmmmm..... i need something to bring the back wheels out, they look so sucked in, i was reading up on it and looking into 33mm rear and 18mm front
-------------------- 1996 Toyota Celica Project Mean Green
3RD Gen 3SGTE WRC Edition W/LSD E153 - Love BOOST <3 2001 Solar yellow Lexus IS300 2001 Dodge ram 1500 Off-road edition |
![]() ![]() |
Lo-Fi Version | Time is now: June 24th, 2025 - 3:12 PM |