turbo setup question Options

[Rymaster]

saw one for sale, guy says it has....

tubular exhaust manifold
Garrett t3-t4 57 trim turbo
tail 35mm wastegate with a 7.5psi spring and a 14psi spring
type rs bov
all the intercooler pipe
a dsm sport fmic
rc 375cc injectors
greddy emanage blue unit with all the wire harnesses and the software
a custom down pipe
oil feed and return lines
boost gauge and pod
adjustable fpr
and a manual boost controler.
also extra turbo stuff, a garrett t3 48 trim turbo(needs rebuilt) extra pipes and couplers , a fmu(12:1) , and some check valves for the map sensor.

i'm pretty clueless when it comes to this, but what else would you need to complete this turbo setup?(if not, how much more would i be looking to spend?) or is everything there? would it all work on a 5sfe?

-thanks!

[LewFX]

sounds like a 7afte setup not a 5sgte

[Rymaster]

what would i need to change to make it a 5sgte setup?

-thanks for the reply btw

[trd94]

saw one for sale, guy says it has....

tubular exhaust manifold
Garrett t3-t4 57 trim turbo
tail 35mm wastegate with a 7.5psi spring and a 14psi spring
type rs bov
all the intercooler pipe
a dsm sport fmic
rc 375cc injectors
greddy emanage blue unit with all the wire harnesses and the software
a custom down pipe
oil feed and return lines
boost gauge and pod
adjustable fpr
and a manual boost controler.
also extra turbo stuff, a garrett t3 48 trim turbo(needs rebuilt) extra pipes and couplers , a fmu(12:1) , and some check valves for the map sensor.

i'm pretty clueless when it comes to this, but what else would you need to complete this turbo setup?(if not, how much more would i be looking to spend?) or is everything there? would it all work on a 5sfe?

-thanks!

sounds like my old setup.... it was a full kit ,you would of needed nothing other then a wrench, and some dyno time to tune it on your car . IF you had a 7afe. for a 5sfe you would of needed a new exhaust manifold, the pipes would of needed to be redone to fit ,and you would of needed a new down pipe. ...... But i have SOLD everything now .

This post has been edited by trd94: Nov 14, 2008 - 9:49 PM

[Rymaster]

that doesn't sound that bad

[MaskedMan]

sounds like a 7afte setup not a 5sgte

I don't think he said anything about a 5sgte.

Anyways, from what I see, the kit is missing the Map sensor, Oil pan, and Fuel Pump. Might be more, but at quick glance, it's what I saw. You'll probably need a new exhaust as well, or a custom intermediate pipe at minimum. If the kit is for a 7afe, and you want to make it fit a 5sfe (5sfte), you're going to need to get 3s manifold, and a t3/t4 manifold to turbo adapter.

[Rymaster]

he gentleman selling it told me i should just need a new manifold and dp correct(down pipe?) I can see needing the exhaust, map senor, and fuel pump as well, but what's with the oil pan? Do i need a bigger one so their will be enough oil for the turbo and engine?


*edit*
btw, any idea what this kit is worth? i was thinking...

$100-tubular exhaust manifold
$250-Garrett t3-t4 57 trim turbo
$50-tail 35mm wastegate with a 7.5psi spring and a 14psi spring
$30-type rs bov
$50-all the intercooler pipe
$75-a dsm sport fmic
$no idea-rc 375cc injectors
$150-greddy emanage blue unit with all the wire harnesses and the software
$50-a custom down pipe
$30-oil feed and return lines
$40-boost gauge and pod
$30-adjustable fpr
$10-and a manual boost controler.
$no idea-also extra turbo stuff, a garrett t3 48 trim turbo(needs rebuilt) extra pipes and couplers , a fmu(12:1) , and some check valves for the map sensor.


comes out to like $865 bucks..think i'm alittle off....what you guys think?

This post has been edited by Rymaster: Nov 15, 2008 - 11:07 AM

[trd94]

ya a little off when i sold the kit i got 2000.00 out of it. the emanage alone sold for 250.00 , and with all the software ,and stuff i got 525.00 . also the manifold will run you a little more . the rc injectors will cost you 350.00 new and not much cheaper used.as far as the oil pan would go all you need to do is tap yours for the return line from the turbo.

This post has been edited by trd94: Nov 15, 2008 - 12:58 PM

[trd94]

he gentleman selling it told me i should just need a new manifold and dp correct(down pipe?) I can see needing the exhaust, map senor, and fuel pump as well, but what's with the oil pan? Do i need a bigger one so their will be enough oil for the turbo and engine?


*edit*
btw, any idea what this kit is worth? i was thinking...

$200-tubular exhaust manifold
$250-Garrett t3-t4 57 trim turbo
$80-tail 35mm wastegate with a 7.5psi spring and a 14psi spring
$30-type rs bov
$150-all the intercooler pipe
$75-a dsm sport fmic
$200 idea-rc 375cc injectors
$525-greddy emanage blue unit with all the wire harnesses and the software
$100-a custom down pipe
$70-oil feed and return lines
$40-boost gauge and pod
$30-adjustable fpr
$10-and a manual boost controler.
$250 idea-also extra turbo stuff, a garrett t3 48 trim turbo(needs rebuilt) extra pipes and couplers , a fmu(12:1) , and some check valves for the map sensor.


comes out to like $2010 bucks..think i'm alittle off....what you guys think? there i fix it for you that is what i got for everything, and that is not including the shipping . hope that helps out a lil bit.

--edited--

This post has been edited by trd94: Nov 15, 2008 - 1:03 PM

[Rymaster]

okay thanks, that helps me out a lot man

[1bwilson]

Yeah, thats about a good estimate on cost

[costa]

ya i think i just saw this thing on ebay, sorry to inform u but i might be bidding against you, its just an awesome deal.

[CelicaST_CALI]

oooooo damm

link?

This post has been edited by CelicaST_CALI: Nov 16, 2008 - 9:26 PM

[Rymaster]

yeah, haa, can't believe no one has bid on it yet, bet a ton of people are watching it


though idk...it's kinda sketchy cause the guy selling it has 0 feedback on ebay .....that's a really pricey item to have as your first sale. idk if i wanna take the risk of bidding on it.....we'll see

[Rymaster]

http://cgi.ebay.com/ebaymotors/ws/eBayISAP...T&viewitem=

cheap

[presure2]

http://cgi.ebay.com/ebaymotors/ws/eBayISAP...T&viewitem=

cheap

thats someone from heres setup, i cant remember who.

[DEATH]

I have the exhaust manifold if anybody buys this.

Edit - from the looks of it you'll need a CT-26 to T3/T4 adapter too but that's easily found on Ebay [Also my stock DP wont work for you in that case].

This post has been edited by DEATH: Nov 21, 2008 - 9:38 AM

[trd94]

http://cgi.ebay.com/ebaymotors/ws/eBayISAP...T&viewitem=

cheap

SCAM!!!!!!!! that is my pic from here, but that is not me on ebay . i need to report this . dont bid you will not get it!!!!!!! that pisses me off!!!

[presure2]

http://cgi.ebay.com/ebaymotors/ws/eBayISAP...T&viewitem=

cheap

SCAM!!!!!!!! that is my pic from here, but that is not me on ebay . i need to report this . dont bid you will not get it!!!!!!! that pisses me off!!!

i knew it was someones..lol
thats a shame.

[CaliJeff]

its kinda funny tho!