 Mike's ST205 GT4 build thread, update: tuned to 200kw |
 Feb 17, 2009 - 10:19 AM
|
 
|
 Enthusiast  Joined Feb 11, '08 From Auckland, New Zealand Currently Offline Reputation: 0 (0%)  |
1996 Toyota Celica GT-Four ST205, Super White.
Current specs: Engine Engine: Toyota 3S-GTE (Rev 3) 2.0L 4-cylinder Block: JE pistons 86.5mm, Eagle rods, ACL race bearings, ARP main studs, ARP head studs, Decked, Bored & Balanced. Head: 3 angle valve grind, factory cams Intake: TTT intake, K&N pod filter Turbo: Garrett GT2860RS Disco Potato Intercooler: factory water cooled topmount, TRD rad cap BOV: HKS SSQV Wastegate: Tial MVR 44mm external Exhaust: TTT manifold, TTT full 3" exhaust Fuel: factory fuel rail, factory 540cc injectors, factory 220LPH fuel pump Ignition: NGK BKR7EIX iridium plugs, factory dizzy, igniter, etc ECU/Electronics: factory ecu, HKS EVC boost control Cooling: alloy twincore rad, TRD thermostat 71c, TRD rad cap 1.3bar, Redline hoses, TTT header tank Oil: TTT catch tank, factory oil & trans cooler Power: TBA Driveline Drivetrain: 4WD 50/50 split, viscous centre, torque sensing rear, open up front. Flywheel: factory fly machined, ARP flywheel bolts Clutch: Clutchmasters FX400 2100lb pressure plate, 4 button ceramic disc Mounts: Nolathane polyurethane engine & gearbox mounts Fluids: Redline gearbox & diff oil Suspension/Brakes Suspension: BC Gold coilovers Brakes (Front): 4 piston calipers, 315mm slotted rotors, factory pads Brakes (Rear): 2 piston calipers, 315mm rotors, factory pads Wheels/Tyres Wheels: OZ Crono 16x8" et38 Tyres: Bridgestone Potenza GIII 205/55R16 Exterior Bodykit: facelift sideskirts, spoiler deleted Lighting: facelift high beams, facelift tail lights Interior Controls: Momo Race Shift knob Instrumentation: HKS 2-bar boost gauge, red led dash bulbs ICE Receiver: Sony Xplod CDX-GT290S cd/mp3/aux Speakers (Front): Sony Xplod XF-GTF1626 6.5" 2-way Speakers (Rear): Sony Xplod XF-GTF1626 6.5" 2-way Started out like this;       
This post has been edited by delusionz: Dec 13, 2012 - 5:25 PM -------------------- Mike W
1996 Toyota Celica ST205 GT-FOUR GT2860RS turbine, TiAL mvr44, JE 86.5φ piston, Clutchmasters FX400, APEX P-FC 269awhp / 273ft-lbs |
Posts in this topic
delusionz Mike's ST205 GT4 build thread Feb 17, 2009 - 10:19 AM
Rusty got gt4 back yet? Dec 24, 2009 - 12:23 AM delusionz F/R superstrut lower arm and both front top strut ... Dec 26, 2009 - 8:55 AM Rusty check the buts, they might need tightning up maybe... Dec 26, 2009 - 11:35 AM delusionz Been a while since I've posted pictures with t... Jan 7, 2010 - 1:33 AM
malpaso That is looking soooo good. TOM'S lip and GT-f... Jan 9, 2010 - 1:43 AM Rusty getting there . toms lip looks tidy, rear lip or s... Jan 7, 2010 - 3:46 AM delusionz Hmm I'm liking the Momo knob I got on at the m... Jan 7, 2010 - 11:25 AM Rusty depending on who you go through, $380+ theres... Jan 8, 2010 - 11:28 PM delusionz Hmmmmmm, Nice! Jan 9, 2010 - 9:56 AM whatthe Looks very nice. Toms lip and gt4 bumper are a goo... Jan 16, 2010 - 11:44 AM manphibian great job Jan 16, 2010 - 12:24 PM delusionz Clear courtesy lenses from a 1996 Toyota Vista SV4... Jan 18, 2010 - 9:31 PM delusionz RE: Mike's ST205 GT4 build thread Jan 19, 2010 - 2:21 AM delusionz RE: Mike's ST205 GT4 build thread Jan 19, 2010 - 10:58 PM delusionz Finally started on my Audio system with some speak... Feb 5, 2010 - 10:47 PM Rusty wow you've done 25,000kms already? yeah wouldn... Feb 6, 2010 - 12:45 AM delusionz Yeah, Similar Denso PK20's came out of the SS-... Feb 6, 2010 - 1:02 AM delusionz Oh yeah, When I put the factory airbox back in a w... Feb 6, 2010 - 1:09 AM delusionz So it was time for new front brake pads...
The fr... Mar 2, 2010 - 5:29 AM Rusty Wwwwwwoooo nice
how much etc?? Mar 2, 2010 - 11:10 PM delusionz $640 for 2x slotted rotors
$228 for 2x g... Mar 3, 2010 - 9:39 PM delusionz After seeing Tigawoods red roof lining, I've g... Mar 3, 2010 - 9:48 PM whatthe QUOTE (delusionz @ Mar 4, 2010 - 1:4... Mar 8, 2010 - 1:24 AM delusionz Work in progress... Mar 6, 2010 - 3:35 AM delusionz RE: Mike's ST205 GT4 build thread Mar 8, 2010 - 1:10 AM delusionz RE: Mike's ST205 GT4 build thread Mar 30, 2010 - 7:38 AM SwissFerdi Would you mind telling me which glue you used for ... Mar 30, 2010 - 1:22 PM delusionz QUOTE (SwissFerdi @ Mar 31, 2010 - 7... Mar 30, 2010 - 4:04 PM SwissFerdi QUOTE (delusionz @ Mar 30, 2010 - 5... Mar 30, 2010 - 4:43 PM delusionz QUOTE (SwissFerdi @ Mar 31, 2010 - 10... Mar 30, 2010 - 5:05 PM Penkka that roof is seriously messed up, on a good way... Mar 30, 2010 - 4:40 PM SwissFerdi Well, reason I ask is because I bought 3M adhesive... Mar 30, 2010 - 5:26 PM delusionz Nah this stuff I use cures in 5 minutes, have to b... Mar 30, 2010 - 6:07 PM delusionz Recent updates...
HKS Bov and Sony mp3 cd player.... Apr 10, 2010 - 10:23 PM Rusty nice upgrade on the BOV, after a while I'd rec... Apr 11, 2010 - 12:24 AM marinos Hello delusionz great looking car.
I want to ask y... Aug 23, 2010 - 1:59 PM delusionz marinos the tom's lip doesnt fit very well, it... Feb 2, 2011 - 4:36 AM delusionz Anyways it's been a while since the last updat... Feb 2, 2011 - 4:40 AM delusionz RE: Mike's ST205 GT4 build thread Feb 2, 2011 - 4:45 AM delusionz Having some engine/turbo trouble now so car is in ... Apr 10, 2011 - 7:36 PM Rusty nice bit of shopping there Apr 11, 2011 - 2:23 AM delusionz Update
Recently (as in my other threads) my engin... Apr 12, 2011 - 2:59 AM delusionz Just turned up in the mail
6x T-Bar clamps 1.5... Apr 12, 2011 - 5:43 AM mak5603 Awesome updates man! Can't wait for the ne... Apr 12, 2011 - 1:56 PM Ted95 Dude the red interior upgrade looks sickkkk esp on... Apr 13, 2011 - 10:16 AM delusionz Received Garrett GT2860RS turbo last week and the ... Apr 28, 2011 - 8:16 AM delusionz Awaiting fitment of new manifold and turbo
Garre... May 3, 2011 - 4:25 AM Rusty looking good, just need the outer low beams now May 3, 2011 - 4:18 PM delusionz Getting close to D-Day
Intercooler waterpump inst... May 10, 2011 - 6:38 PM delusionz I also found a HKS SSQV plumb back adaptor to plum... May 10, 2011 - 6:47 PM delusionz 99% done! Steampipe manifold, T28 exhaust hous... May 13, 2011 - 12:29 AM S8S8 Looking good. May 13, 2011 - 5:32 AM makis Good job my friend! May 13, 2011 - 8:41 AM delusionz Holy cow the car is so fast!!!! GT... May 14, 2011 - 2:25 AM delusionz I really wish I had a real camera right now May 16, 2011 - 7:36 PM Needles QUOTE (delusionz @ May 16, 2011 - 8... May 16, 2011 - 8:19 PM delusionz My kick-ass bov setup is visible in this picture, ... May 16, 2011 - 7:43 PM delusionz Yep May 16, 2011 - 8:31 PM delusionz Some photos showing my new manifold, downpipe, tur... May 16, 2011 - 10:04 PM delusionz ~ May 23, 2011 - 1:11 AM korban Man that's looking awesome, i'm so jealous... May 24, 2011 - 6:33 PM delusionz According to Garret specs the wastegate is set at ... May 27, 2011 - 5:42 AM opie_7afe if i can remember correctly alternator voltage sho... Jun 5, 2011 - 3:22 PM johnyboy1976 Great stuff Jun 5, 2011 - 3:31 PM delusionz Fixed voltage, turned out to be a bad solder joint... Jun 6, 2011 - 7:02 AM delusionz RE: Mike's ST205 GT4 build thread Jun 13, 2011 - 2:57 AM NZss1fun Looking good!!! glad to see u got all ... Jun 13, 2011 - 3:45 AM delusionz The update for today is ...
OZ Crono 16x8 ET38 Jun 19, 2011 - 2:56 AM TRDGT4 nice score Jun 19, 2011 - 3:59 AM Rusty hasn't won them yet...
looks nice, bit of cur... Jun 19, 2011 - 4:04 AM delusionz Yea they're on the car right now, Just don... Jun 19, 2011 - 5:00 AM delusionz They sit pretty damn flush too, OZ wheels 16x8 ET3... Jun 19, 2011 - 5:27 AM S8S8 Nice choice of rim Mike.
Let's see some pics ... Jun 19, 2011 - 9:38 PM delusionz RE: Mike's ST205 GT4 build thread Jun 23, 2011 - 5:07 AM Neon90424 I have the same Fuel cut problem at the same revs ... Jun 23, 2011 - 6:33 AM delusionz I fixed overboost by having the wastegate ported, ... Jun 23, 2011 - 11:04 AM Rusty dyno booked?
maybe look into the evc5, brother ... Jun 24, 2011 - 1:48 AM Neon90424 a 700$ boost controller? I bought an ebay one... Jun 24, 2011 - 7:56 AM delusionz got the water spray nozzles are hooked up in the c... Jun 27, 2011 - 7:08 AM Neon90424 I thought you were doing Water injection not water... Jun 27, 2011 - 8:09 AM delusionz co2 spray is no good, some of it gets sucked into ... Jun 27, 2011 - 8:44 AM Culpable04 fuel pumps shouldn't be used as water pumps, t... Jun 27, 2011 - 2:05 PM delusionz RE: Mike's ST205 GT4 build thread Jul 14, 2011 - 9:23 AM Neon90424 Why would it be sucked into the intake and reduce ... Jul 14, 2011 - 2:36 PM Rusty Rims need a clean.
CO2 (Carbon dioxide) is the ... Jul 15, 2011 - 2:56 AM delusionz Another engine pic I have
QUOTE (Rusty @ ... Jul 18, 2011 - 8:21 AM lzha269 ROFL! i think i saw u car yesterday!!... Aug 1, 2011 - 11:46 PM beams78 nice pic on the engine bay pretty clean Aug 2, 2011 - 12:07 AM Neon90424 just freeze ur intercooler BEFORE you race. Aug 2, 2011 - 9:12 AM delusionz @lzha: maybe...
@neon: you'll see what i have... Aug 2, 2011 - 10:30 AM Neon90424 Updates?? Nov 23, 2011 - 5:33 AM rave2n That bay is inspiring. Nov 23, 2011 - 8:25 AM delusionz RE: Mike's ST205 GT4 build thread Mar 7, 2012 - 5:41 PM S8S8 Looking good Mike. Mar 7, 2012 - 6:31 PM SwissFerdi I was going to comment on your Faff, but then I sa... Mar 7, 2012 - 8:03 PM delusionz while engine being forged i got a chance to make s... Mar 10, 2012 - 12:31 AM delusionz Few bits and bobs for engine build
Also have... Apr 3, 2012 - 10:30 PM delusionz Builds done Jun 1, 2012 - 6:27 PM delusionz RE: Mike's ST205 GT4 build thread Jun 1, 2012 - 6:34 PM delusionz Off the top of my head...
Forged 3SGTE block
- De... Jun 1, 2012 - 6:42 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: October 23rd, 2025 - 9:24 PM |