Aug 28, 2014 - 3:37 PM
|
|
|
Enthusiast ![]() Joined Aug 2, '11 From southampton Currently Offline Reputation: 0 (0%) |
Hi guys. Lot more experience with 3sgte swaps over here I believe
Mine went in, and initially was using a s54 box with SSI drive shafts. These got destroyed, the drive shaft box end had massive movement after a couple of months of not super hard driving. Took out the s54 as well I bought a e56 plus shafts, but unfortunately this was non-working (only 3rd gear!). Another S54 went in, with more drive shafts, this time ones from a 3sge. One spirited hard drive and the drive shafts went again. More driveshafts going in so drivable, and no thrashing for a moment. Now, looking for a e56 with stronger drive shafts, know that's needed (for the LSD as well). HOWEVER....anyone been running the 3sgte with the normal s54 box and shafts, and has it been holding up any better ? Or are these just too weak. Sure I have read the standard box being used, including on 5sftes, and holding the power. Be interested to hear your experiences. This post has been edited by digs: Aug 28, 2014 - 3:38 PM |
digs 3SGTE engine swap GearBox question Aug 28, 2014 - 3:37 PM
acidice333 Ive been using the st205 stock engine with a s53 f... Aug 29, 2014 - 1:57 PM
digs QUOTE (acidice333 @ Aug 29, 2014 - 7... Aug 29, 2014 - 5:47 PM
enderswift I ran a 3s with an s54 w/o issues until I decided ... Aug 29, 2014 - 6:38 PM
digs Thanks, maybe a combination of second parts rather... Sep 2, 2014 - 7:13 AM
digs Just an update, e56 now in and drive shafts are th... Oct 8, 2014 - 6:17 AM
Smaay yes or a MR2 turbo clutch. Southbend is a good on... Jan 7, 2015 - 12:38 AM
digs cheers dude
e56 box is def recommended, working ... Feb 3, 2015 - 4:37 PM
Smaay 7th gen GT-S axles will also work in an S54. they ... Feb 3, 2015 - 7:23 PM
enderswift QUOTE (Smaay @ Feb 3, 2015 - 8:23 PM... Feb 5, 2015 - 11:00 PM
Smaay QUOTE (enderswift @ Feb 5, 2015 - 8... Feb 7, 2015 - 10:17 PM
mgnt232 QUOTE (Smaay @ Feb 7, 2015 - 11:17 P... Feb 11, 2015 - 9:36 AM
digs yeah,very interesting, thanks for the nod, as abov... Feb 6, 2015 - 5:35 PM
lagos There is an aftermarket axle manufacture called Ca... Feb 11, 2015 - 1:30 PM
Smaay I drag raced in my 7th gen on a stock C60 with a Q... Feb 12, 2015 - 8:44 AM![]() ![]() |
| Lo-Fi Version | Time is now: October 24th, 2025 - 8:56 PM |