Aug 25, 2009 - 10:12 PM
|
|
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 4, '06 From Chicagoland Currently Offline Reputation: 9 (100%) |
For those who haven't seen it, I've got a progress thread going in the Multimedia section and now that I've got the motor in, I've got a no-start situation.
I picked up a rebuilt 5s from celicatech that was out of a 93 convertible. I pulled my old motor and swapped over all the sensors (I did miss the sensor by the crank pulley) and accessories but now that I'm trying to start the car, I'm not getting any power when I turn the key to the 'on' position. The courtesy lights work as does the airbag light, but those are the only dummy lights that come on when the key is turned. I've gone over all of the fuses and there are none that are blown. I'm only showing one wire that has power at the ecu and the other 2-3 that should when the key is turned are coming up as grounded. I'm at a loss as to what the issue could be. Also, will I be able to run the motor without that sensor by the crank pulley? I really need to get this car running...... Thanks! -------------------- ~bloodMoney
![]() |
bloodMoney 96 GT no start Aug 25, 2009 - 10:12 PM
Mstoochn there's a problem with ur harness, either a cu... Aug 26, 2009 - 1:54 AM
Bitter do you get power at the pins with the ecm unplugge... Aug 26, 2009 - 6:54 PM
bloodMoney Okay. Thanks to an idea that I read about in one o... Aug 27, 2009 - 4:45 AM
Cavegod you will need the loom and ecu that was with the n... Aug 27, 2009 - 10:19 AM
bloodMoney I took the hard road and decided to pull 3 of the ... Aug 27, 2009 - 10:10 PM
Bitter QUOTE (bloodMoney @ Aug 27, 2009 - 11... Aug 29, 2009 - 12:01 AM
Cavegod but has your crank got the sensor ring on it? Aug 28, 2009 - 1:54 AM
bloodMoney The sensor just bolts to the front cover on the mo... Aug 28, 2009 - 1:21 PM![]() ![]() |
| Lo-Fi Version | Time is now: January 15th, 2026 - 9:02 AM |