 Fixed the power loss need a few pointers now on fcd & a/c |
 Aug 20, 2009 - 9:32 PM
|
 
|
|
Enthusiast  Joined Feb 2, '09 From new orleans La. Currently Offline Reputation: 5 (86%)  |
I fixed the power oss and hesitation. But in the process I had to drain my ac/ line so its no functional. I figure I will leave it till next summer. So I want to remove the ac idle up valve becaus ethe ac is unhooked and I think there is a vacum leak around the ac idle up valve. So Is all I have to do is unhook all the vacum lines going to the ac idle up vale and cap them off? Is this the right way? Also I have dialed in my mbc at 13lbs for now. I have a fcd that I never installed but want to because I hit fuel cut at about 15-16lbs and I want to run atleast 15lbs. The thing is about the fcd I lost the install directions. Any one can tell me what 3 wires to soder the fcd into?
This post has been edited by mk7celica: Aug 21, 2009 - 1:23 AM |
Posts in this topic
mk7celica Fixed the power loss need a few pointers now on fcd & a/c Aug 20, 2009 - 9:32 PM
lagos what was the cause of the power oss? and what is a... Aug 20, 2009 - 11:01 PM mk7celica Well the power loss not oss LOL, but it was caused... Aug 21, 2009 - 1:09 AM lagos email twosRus, they are normally very helpful.
wh... Aug 21, 2009 - 1:56 AM mk7celica You know It happened like you described the knock ... Aug 21, 2009 - 3:29 PM lagos if the gasket came with the downpipe its not oem. ... Aug 21, 2009 - 4:03 PM
mk7celica pressure2 sent it to me I am not sure if its oem. ... Aug 21, 2009 - 4:08 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: September 18th, 2025 - 7:43 PM |