Oct 5, 2009 - 10:40 PM
|
|
|
Enthusiast ![]() ![]() ![]() Joined Mar 26, '09 From Minnesota Currently Offline Reputation: 5 (100%) |
So after a year, my Celica officially runs good as of today. Only problem is my temp gauge reads cold. I think everything is hooked up. I think my sensor is hooked up right? Not sure...
![]() ![]() I found a cord in the back that was not hooked up though. I don't know where it goes... ![]() This plug *edit: this plug goes the egr* ![]() Any input will greatly be appreciated since winter is on it's way. This post has been edited by Nartanian: Oct 7, 2009 - 4:55 PM -------------------- "God created turbo lag to give V8's a chance"
![]() |
Nartanian Temp Gauge Not Working Oct 5, 2009 - 10:40 PM
bccentaur3 shouldnt there be more than just one plug on the c... Oct 5, 2009 - 11:04 PM
Nartanian Ok, I'll check 1st thing tomorrow. I'm gon... Oct 5, 2009 - 11:06 PM
trdproven temp gauge sensor is near the coolant inlet to the... Oct 6, 2009 - 6:47 AM
azian_advanced if the sensor is unplugged, you should be getting ... Oct 6, 2009 - 7:22 AM
Nartanian This morning I double checked all the wiring and e... Oct 6, 2009 - 9:58 AM
Nartanian I gotta feeling this might be the fault. Can anyo... Oct 6, 2009 - 3:34 PM
Nartanian I replaced all the sensors and still no luck... I ... Oct 7, 2009 - 9:00 AM
Nartanian Cluster is out. Everything seems fine. No corroded... Oct 7, 2009 - 4:54 PM
azian_advanced check to make sure the radiator fan plugs are plug... Oct 7, 2009 - 7:43 PM
trdproven you replaced the sensors? never seen an st so it ... Oct 7, 2009 - 8:20 PM
Bitter if both fans are always on then the sensor circuit... Oct 8, 2009 - 7:23 AM
Nartanian Wow, after all that work, I found the stinkin culp... Oct 8, 2009 - 10:45 AM![]() ![]() |
| Lo-Fi Version | Time is now: September 23rd, 2025 - 8:14 AM |