 Price advise please, Oil Pan |
  |
 Oct 6, 2009 - 5:24 PM
|
 
|
|
Enthusiast  Joined Jan 20, '08 From East Coast Currently Offline Reputation: 1 (100%)  |
What's the typical oil pan gasket replacement cost at a shop. I live in NH so local guys please let me know if you know. I'm thinking $400? mine appears to be leaking on the right side (pass-side) and I may need a new one soon.
|
|
Oct 6, 2009 - 5:34 PM
|
|
 Enthusiast Joined Mar 8, '08 From Orlando, Florida Currently Offline Reputation: 14 (100%) |
Are you certain it is the oil pan? All the gaskets are on that side behind the timing cover (crank, oil pump, etc?) leak and run down and settle there by the pan, check to be sure!
-------------------- ◊◊◊ My F/S Thread! ◊◊◊
QUOTE (14:19:21) Daniel: That was a JDM hole in the side of the box too. There was so much JDM trapped inside that box that they couldn't contain it, so they had to put a JDM hole in the box to let the JDM out. QUOTE Ferdi says (11:29) No, it looks like a hooker put her acid vag on your hood. Acid vag = bigger problem than a few dings. |
|
Oct 6, 2009 - 6:12 PM
|
|
 Enthusiast Joined Jul 24, '08 From Canoga Park CA. Currently Offline Reputation: 0 (0%) |
Mine is leaking there also, it is the oil pump gasket which is under the timing cover and behind the oil pump front gear so when I do the timing belt I will get to it. Also I replaced my valve cover gasket and it has been drying up nicely, except for that spot .
This post has been edited by xrav22: Oct 7, 2009 - 6:34 PM |
|
Oct 6, 2009 - 7:22 PM
|
|
|
Enthusiast Joined Jan 20, '08 From East Coast Currently Offline Reputation: 1 (100%) |
I'll have to check that out then. My intake manifold bolts on the bottom are wet too.
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: September 22nd, 2025 - 9:49 PM |