 High Beam Cleanout, Help On How To Clean Out The Brown Muck Inside |
 Jan 10, 2010 - 9:09 PM
|
 
|
|
Enthusiast  Joined Aug 23, '09 From Ohio Currently Offline Reputation: 0 (0%)  |
I have a major problem with the high beams and I got them out but need to clean them out. I have H.I.D.'s ready to be put in the high beams but one of them is completely brown and the other starting to turn brown from water laying in for years. I don't know how to either take the glass part off the front or back part of it which is plastic. I know though that both need to be scrubbed clean to form the shine again and then re-sealed to make sure no water gets in it ever again.
I'd appreciate it if someone would help me out by telling me how to clean both out and then making sure they are tightly sealed so no water gets in. Thank you, Seth (CelicaST96) |
Posts in this topic
CelicaST96 High Beam Cleanout Jan 10, 2010 - 9:09 PM
Ruroniarc There are a couple of guides around here. Basicall... Jan 10, 2010 - 9:31 PM ajmorris1977 no exactly the best answer for you but i think it ... Jan 11, 2010 - 1:36 PM jordisonjr If you really have a lot of water in it you can dr... Jan 11, 2010 - 10:15 PM BonzaiCelica my right high beam started to get water in it. I j... Jan 11, 2010 - 11:06 PM
GriffGirl Pull your bumper, remove the offending headlight, ... Jan 11, 2010 - 11:09 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 20th, 2025 - 9:39 PM |