6G Celicas Forums

Welcome Guest ( Log In | Register )

> WTT: new HKS Gen III cams for stock Gen III cams + other parts, trade HKS cams for stock cams, timing tensioner, timing idler...etc
post Mar 15, 2010 - 4:31 AM
+Quote Post
match220



Enthusiast
***
Joined May 13, '06
From Kaimuki, HI
Currently Offline

Reputation: 10 (100%)




I have brand new HKS Gen III 3SGTE cams that are installed but my engine was never finished because I ran out of cash for the turbo and related components. So now I'm trading parts for parts just so I can get my car running and sell it for financial reasons frown.gif

The cams are HKS Gen III (2202-RT065 2202-RT066), honestly never used, John (aka 808celica) can vouch for me on them never being used if he chimes into this thread.

The parts that I need in exchange are stock GEN III cams (turbo or non-turbo) a timing belt tensioner and timing belt idler, a throttle body, stock oil cooler, stock alternator bracket (GT-Four type) a 5SFE manual trans starter (if not then just add $60 to the trade), the cylinder head hanger hooks (I'm not sure if there are one or two), and stock side feed injectors. All parts are 3sgte except for the 5sfe manual trans starter. Thanks!

If you don't have these parts then $500 for the cams will probably be enough for me to cover the parts that I need, so that's another option, but I would rather just do a swap.

and please call or text me at 808-782-1769 if you have any questions, keep in mind I'm in hawaii and I'm 3 hours behind california time and 6 hours behind east coast time

This post has been edited by match220: Mar 15, 2010 - 4:38 AM


--------------------
-Jay

95 GT conv. project car: Manual, Gen III 3sgte, JN pisons, Eagle rods, overbore, crank knife-edged, crank scraper, ARP head/main/flywheel, Autronic EMS, Haltech Dual Wideband O2 controller, Audi 1.8T individual coils, FMIC and SSQV BOV, 3" downpipe, 3" ultra-high-flow cat, 2.5" Borla muffler, +other
01 S2000: FMIC, Haltech EMS, Haltech wideband, 570cc inj, forged pistons/rods, sleeved block, 5 angle valve job, ported and polished
02 R6, all stock, except for braided stainless brake lines, frame sliders, and adjustable brake/clutch leve

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: July 28th, 2025 - 9:17 AM