FS: 6gc Powdercoating Options

[richee3]

As some of you know from the chat, lately I have started doing some powdercoating. I can only do smaller items- no wheels, for example. But I can powdercoat valve covers, brake calipers, things like that. I am looking for more metal to powdercoat and as I get more things powdercoated, I will have more example pictures of my work. If anyone needs anything powdercoated, let me know and I'd be glad to do it for you!

7A-FE Valve cover




Aluminum Ebay intake pipe


5S-FE Valve cover, high-temp silver Erm... Excuse how dirty the engine bay is. I just bought this car two days ago and it doesn't run.




Right now, I only have very basic colors on hand. As the orders come in, I will order more powder. Also, do not send me any parts that keep your car functioning if you daily drive the car!!! I just know someone is going to take their brake calipers off of their DD and send them to me and realize the next day that they need the car... So let's be sensible about this! That being said, I am looking forward to offering a powdercoating service for anyone that needs it.

I can do valve covers and exhaust manifold covers for $45 and calipers for $60 (since there are two in a pair. More cleaning, more preparation, etc.) Anything fancy will mean a little more money, of course. As I get more powder in, prices are likely to go down. Powdercoating is not limited to car parts either. I can powdercoat anything you like, as long as it's metal.

This post has been edited by richee3: Apr 12, 2010 - 8:32 PM

[CelicaST_CALI]

Can we get some base prices?Like for valve cover,manifolds,intake,calipers,ect?

[Spider77]

Great, now im gunna have to source some calipers! I'll try to get that and the powder that I want for that together. Clean em up nice and send them your way!

[mgnt232]

what exactly is the difference between something like engine enamel and powder coating?
I enameled most of my engine parts, but I know there is a difference with powder coating, what exactly is that difference?
and some base costs would be nice

[richee3]

Original post edited with some prices. I will continue editing the post as necessary.

Spider- my original offer that we discussed in chat still stands for you.

mgnt232- Engine enamel is a kind of paint. It does the job just fine, but powdercoating is a little more durable and looks a little more professional. It's very tough and scratch- and chip-resistant. Just to give you an idea of some things that are powdercoated...

The red parts of the Redtop BEAMS engine.


The wheels on this car.


The deck of this lawnmower.


This post has been edited by richee3: Apr 11, 2010 - 6:39 PM

[pipes]

You think I can get all my calipers done in purple?

[Serhey]

I will definitely contact you around september, hopefully when i get a new car, and probably talk to you about some neon purple calipers, and few other accessories of the same color.

[_Jim_]

Good for you Dan, could you shot me over your shipping address again so I can send out my items for you to powder, YOU ARE THE BEST!

[richee3]

A couple of new pictures added to the original post.

You think I can get all my calipers done in purple?

Absolutely. Not even a problem. Like I said, discounts will be given for more than one item.

I will definitely contact you around september, hopefully when i get a new car, and probably talk to you about some neon purple calipers, and few other accessories of the same color.

Neon purple will cost just slightly more because it needs clear coat, but not a whole lot. And as I just mentioned, discounts will be given on combined items.

Good for you Dan, could you shot me over your shipping address again so I can send out my items for you to powder, YOU ARE THE BEST!

Sending PM. By the way, my first post and your PM will have updated pictures of your silver.

[GriffGirl]

Are you able to sandblast parts clean before coating them? And who's 7AFE valve cover is that? I have a 7AFE valve cover that is powdercoated, but I think it was done wrong/poorly because the coating bubbled and looks like complete ass now. I'd LOVE to get a new valve cover for it, and I'd even be willing to send you this one as a core to get you started for those 7A dailies who can't live w/out their valve covers.

And when I source calipers, I'm sending you those to coat for me, too! (but I will keep my current ones as back ups, ya just never can tell)

edit: PS: I think I figured out how to tether my Droid, so I should be back in chat at night again soon. If not, then in 2 weeks after I move.

This post has been edited by GriffGirl: Apr 13, 2010 - 4:37 PM

[richee3]

Are you able to sandblast parts clean before coating them? And who's 7AFE valve cover is that? I have a 7AFE valve cover that is powdercoated, but I think it was done wrong/poorly because the coating bubbled and looks like complete ass now. I'd LOVE to get a new valve cover for it, and I'd even be willing to send you this one as a core to get you started for those 7A dailies who can't live w/out their valve covers.

Sandblasting is essential to powdercoating! I am working on getting a better parts washer too, because the ol' "Wipe everything down with a rag and mineral spirits" sucks. It works, but it sucks. That was the valve cover from my ST parts car. I had it sitting around for a while and I decided to powdercoat it. A few days after I did that, a member came and picked up the entire motor, so I don't have that valve cover anymore. Otherwise I would have sent it to you.

And when I source calipers, I'm sending you those to coat for me, too! (but I will keep my current ones as back ups, ya just never can tell)

No rush! I can do whatever you like with them. Definitely hold onto the ones you've got. Having spare parts, especially with cars like ours, is never a bad idea.

edit: PS: I think I figured out how to tether my Droid, so I should be back in chat at night again soon. If not, then in 2 weeks after I move.

I've been wondering where you've been! I've been a little busy since I sold my car so I haven't had a lot of time to be in the chat, and I've noticed you haven't been there at all. It's been lonely. Come back soon!

[richee3]

Bump. Updates coming soon.