May 24, 2010 - 11:30 AM
|
|
|
Enthusiast ![]() ![]() Joined Oct 25, '07 From Eagan, MN Currently Offline Reputation: 3 (100%) |
This past weekend I replaced the parking brake assembly and pads, and to my astonishment the driver side assembly was missing with the brake line zip strip tied to the dust shield. So I got the strut bar and lever off a camry at the local yard and assembled everything to spec. After adjusting the starwheel and the nuts on the handle, the only side that engages is the passenger. So I figured maybe someone took the driver side out for a reason or because they didn't know how to adjust the lines at the equalizer. So my question is where is the equalizer on the Celica? I checked the under body and online databases but none were of help. If I can get the lines adjusted there then I should theoretically be good to adjust. Anybody have any experience with this? Thanks guys
-------------------- -Tyler
|
tjblacrosse Parking Brake Adjusting Problem May 24, 2010 - 11:30 AM
playr158 The ebrake shoes are adjusted at the wheel themsel... May 24, 2010 - 11:33 AM
tjblacrosse Ah man that's a sneaky little location. I wond... May 24, 2010 - 12:49 PM
playr158 a) not assembled correctly
b) adjuster not adjust... May 24, 2010 - 12:50 PM
tomazws May I ask if heat shield must be remove in order t... May 24, 2010 - 12:55 PM
playr158 yes. I haven't done it in over 6 years but you... May 24, 2010 - 1:56 PM
tjblacrosse Yea that's what I figured I'll just get a ... May 24, 2010 - 2:39 PM
Galcobar If I recall correctly, the e-brake cables must cro... May 27, 2010 - 4:40 AM![]() ![]() |
| Lo-Fi Version | Time is now: December 16th, 2025 - 5:02 PM |