FS:5sfe Webcams "294" grind camshafts, SOLD!!!!!!!! Options

[presure2]

i had a lot of interest on these before i ever pulled the motor, sorry i cant remember everyone who PM'd me and in what order, so here they are.

these are used 5sfe camshafts, that were hardwelded and ground for dustin(batman722) a few years back by webcamshafts www.webcamshafts.com
they list on theyre site for 733$, and they need you to send them a set of stock cams to work from.

here is a dyno of dustins car, after the cams.
the blue line is a stock 5sfe with an intake, the red line is dustins 5sfe with the cams, intake and exhaust



thats a 20whp peak increase, and 10ftlbs. the big gains come after peak tho, with 30+whp and tq near and at redline, where the 5sfe really needs it!

i used these in my 5sfte build to help make 300+whp and 320ftlbs.

i will also include the 16 shims i used during the installation of them, the shims cost $6.83 each from toyota. partznet link:
http://www.trademotion.com/partlocator/ind...playCatalogid=0

they may not all work in your application, but i will bet most of them will end up getting you really close, and will probably save you at least 80-100$ in installation costs.
when you install the cams, the shim thickness is usually larger than the "typical" sizes most stock cars use, so these larger ones that i am including are a key item.
pics.

intake cam



exhaust cam



in shipping box, shims are in the ziplock bag.





400$ + 15$ shipping VIA USPS priority mail in the USA. (anywhere else PM me to get a shipping quote)
first with cash (paypal works best for me) takes em.
paypal is manuelcosta25@comcast.net

thanks!