 6th Gen Celica Rally Car AWD Build, Rebuilding after the roll..... |
  |
 Sep 4, 2012 - 11:41 AM
|
 
|
|
Enthusiast  Joined Sep 27, '10 From pittsburgh Currently Offline Reputation: 4 (100%)  |
QUOTE (dmanisgnarly @ Sep 4, 2012 - 11:55 AM)  I'm currently working on my light bar and have come to the conclusion that anything over 7 inches tall and I won't be able to see the road clearly. If I move my setup too far forward I'm afraid I'll bang it up if I make any contact with the front(Inevitable in rally). Then again I could make a 2" riser for my seat bracket, but then again I might have issues with my brain bucket smacking my cage/roof. What kind of lightbar is on your car? It's a shame RALLY USA or NASA GRASSROOTS wont let you have a roof mount light option  I bought it from someone in the UK. Even with shipping its cheaper than buying them in the USA from RRE. I used DZUS fastners on the hood, with a custom pin setup on the bumper. We can remove/install the lightpod in less than 30 seconds. The lights I have hella 4000 compact lenses, 2 driving, 2 fog, with 55w HID conversions. http://www.ebay.co.uk/itm/UNIVERSAL-SPOT-F...=1#ht_722wt_156 Do you have any pics of your build? -------------------- -93 Rx7, Turbo 6.1L v8, 725rwhp/760rwtq
-95 Celica GT Rally Car - 3sge/AWD -10 F150 Always buying stock wheels... PM me if interested in selling. |
|
Sep 4, 2012 - 12:53 PM
|
|
 Enthusiast Joined May 22, '03 From NOVA Currently Offline Reputation: 16 (100%) |
Great recovery time and work!
I was with the new paint until those white stripes made me sad 
|
|
Sep 4, 2012 - 1:55 PM
|
|
|
Enthusiast Joined Sep 27, '10 From pittsburgh Currently Offline Reputation: 4 (100%) |
QUOTE (playr158 @ Sep 4, 2012 - 12:53 PM) Great recovery time and work! I was with the new paint until those white stripes made me sad Haha, well you can blame my girlfriend. It was her idea. It grew on me, i think itll look even better once I get the numbers and event stickers on because they usually have a white backdrop. -------------------- -93 Rx7, Turbo 6.1L v8, 725rwhp/760rwtq
-95 Celica GT Rally Car - 3sge/AWD -10 F150 Always buying stock wheels... PM me if interested in selling. |
|
Sep 14, 2012 - 12:58 AM
|
|
 Enthusiast Joined Sep 9, '12 From 13114 Currently Offline Reputation: 0 (0%) |
[/quote]
Haha I'll be very happy if that doesnt happen. Ill probably be driving like a grandma in the next race. One thing as far as welding... spend the extra money, use gas. Flux-core vs gas isn't even close in comparison. Welding it depends... some is easy some is difficult, gravity plays a big part in making things difficult. If you're welding upide down etc. Also thicker metal is much easier to weld than thin stuff. Body panels are very difficult to weld. [/quote] ^This was suppose to quote from the other day, but damn html is being not-cool! Haha, Completely true. I weld 15-30 ton aluminum ingots to 1-1/5-5 inch sleeves, and boy, between running a bead with a push, its as smooth as butter. Same pull on a 1/8 inch steel and really gotta get your "C's". haha This post has been edited by Duke: Sep 14, 2012 - 1:04 AM -------------------- "I won't be wronged, I won't be insulted, and I won't be laid a hand on. I don't do these things to other people, and I require the same from them." John Wayne
“A little knowledge is a dangerous thing. So is a lot.” -Einstein- "Taking Life One Day at a time, and Never Looking Back" -Herb- DUKE HAS SPOKEN |
|
Sep 14, 2012 - 8:10 AM
|
|
|
Enthusiast Joined Jan 19, '11 From Paraguay, Winchestertonfieldville Currently Offline Reputation: 1 (100%) |
the white stripes are an awful band
This post has been edited by Neon90424: Sep 14, 2012 - 8:10 AM -------------------- |
|
Sep 14, 2012 - 8:36 AM
|
|
|
Enthusiast Joined Aug 29, '02 From Lake Orion, MI Currently Offline Reputation: 6 (100%) |
QUOTE (Neon90424 @ Sep 14, 2012 - 9:10 AM) the white stripes are an awful band You hold your tongue! -------------------- -Mike
mjcoury@gmail.com Team Reynolds Style Celica Blog Celica Wiki It will take him a moment to realize that he's about to make a 180 degree turn at speed, but you will be ready for it. Brace for the g's, and fast heel-toe work. |
|
Sep 16, 2012 - 11:13 AM
|
|
|
Enthusiast Joined Sep 27, '10 From pittsburgh Currently Offline Reputation: 4 (100%) |
Well... horrible luck two rallys in a row. Blew out the rear diff bearings about 4 miles in... it moves, but the rear differential is destroyed, i can feel the pinion and ring gear binding.
-------------------- -93 Rx7, Turbo 6.1L v8, 725rwhp/760rwtq
-95 Celica GT Rally Car - 3sge/AWD -10 F150 Always buying stock wheels... PM me if interested in selling. |
|
Sep 16, 2012 - 11:56 AM
|
|
 Moderator Joined Jun 29, '08 From Denver Currently Offline Reputation: 59 (100%) |
The white Toyota lettering on the rear fender really pops against the blue. The car looks great!
What will you do for the rear diff? Rebuild it, replace it with a donor from another AWD vehicle or ST205? -------------------- "Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us to use the search button!
 2006 Aston Martin V8 Vantage. 1998 Celica GT- BEAMS Swapped. 2022 4Runner TRD Off Road Prenium. 2021 GMC Sierra AT4. |
|
Sep 16, 2012 - 5:57 PM
|
|
|
Enthusiast Joined Aug 29, '02 From Lake Orion, MI Currently Offline Reputation: 6 (100%) |
QUOTE (czwalga @ Sep 4, 2012 - 12:41 PM) QUOTE (dmanisgnarly @ Sep 4, 2012 - 11:55 AM) I'm currently working on my light bar and have come to the conclusion that anything over 7 inches tall and I won't be able to see the road clearly. If I move my setup too far forward I'm afraid I'll bang it up if I make any contact with the front(Inevitable in rally). Then again I could make a 2" riser for my seat bracket, but then again I might have issues with my brain bucket smacking my cage/roof. What kind of lightbar is on your car? It's a shame RALLY USA or NASA GRASSROOTS wont let you have a roof mount light option I bought it from someone in the UK. Even with shipping its cheaper than buying them in the USA from RRE. I used DZUS fastners on the hood, with a custom pin setup on the bumper. We can remove/install the lightpod in less than 30 seconds. The lights I have hella 4000 compact lenses, 2 driving, 2 fog, with 55w HID conversions. http://www.ebay.co.uk/itm/UNIVERSAL-SPOT-F...=1#ht_722wt_156 Do you have any pics of your build? If you are feeling saucy: C-One Rally Lamp Pod for ST205 Remember prices are in NZ dollars! -------------------- -Mike
mjcoury@gmail.com Team Reynolds Style Celica Blog Celica Wiki It will take him a moment to realize that he's about to make a 180 degree turn at speed, but you will be ready for it. Brace for the g's, and fast heel-toe work. |
|
Sep 17, 2012 - 7:40 PM
|
|
|
Enthusiast Joined Sep 27, '10 From pittsburgh Currently Offline Reputation: 4 (100%) |
Well here's the vid of the car breaking. Can't tell too much from the video, but it was really bad. In reverse i'd have to pop the clutch just to get it to move because the rear end is binding.
I was taking it easy after the roll at wv... so i was really backing off the 5's and 6's when i should have been flat through them. http://www.youtube.com/watch?v=YM0165Xvudw...eature=youtu.be -------------------- -93 Rx7, Turbo 6.1L v8, 725rwhp/760rwtq
-95 Celica GT Rally Car - 3sge/AWD -10 F150 Always buying stock wheels... PM me if interested in selling. |
|
Sep 18, 2012 - 2:41 PM
|
|
|
Enthusiast Joined Sep 27, '10 From pittsburgh Currently Offline Reputation: 4 (100%) |
If anyone knows anyone that has an AWD subframe laying around that was trying to accomplish the AWD swap but couldn't let me know.
I think I just need the diff, but I'd like everything to have as spares. RPMgarage has the entire subframe for $145, but shipping is 1k; which is insane. -------------------- -93 Rx7, Turbo 6.1L v8, 725rwhp/760rwtq
-95 Celica GT Rally Car - 3sge/AWD -10 F150 Always buying stock wheels... PM me if interested in selling. |
|
Sep 18, 2012 - 7:53 PM
|
|
|
Enthusiast Joined Aug 29, '02 From Lake Orion, MI Currently Offline Reputation: 6 (100%) |
QUOTE (czwalga @ Sep 18, 2012 - 3:41 PM) If anyone knows anyone that has an AWD subframe laying around that was trying to accomplish the AWD swap but couldn't let me know. I think I just need the diff, but I'd like everything to have as spares. RPMgarage has the entire subframe for $145, but shipping is 1k; which is insane. Steve - Check fensport and other UK people... they seem to be the most realistic with pricing... I got an entire rear 1/2 for ~ $1500 I am sure I paid extra for shipping the body -------------------- -Mike
mjcoury@gmail.com Team Reynolds Style Celica Blog Celica Wiki It will take him a moment to realize that he's about to make a 180 degree turn at speed, but you will be ready for it. Brace for the g's, and fast heel-toe work. |
|
Sep 18, 2012 - 7:53 PM
|
|
|
Enthusiast Joined Aug 29, '02 From Lake Orion, MI Currently Offline Reputation: 6 (100%) |
QUOTE (czwalga @ Sep 18, 2012 - 3:41 PM) If anyone knows anyone that has an AWD subframe laying around that was trying to accomplish the AWD swap but couldn't let me know. I think I just need the diff, but I'd like everything to have as spares. RPMgarage has the entire subframe for $145, but shipping is 1k; which is insane. Steve - Check fensport and other UK people... they seem to be the most realistic with pricing... I got an entire rear 1/2 for ~ $1500 I am sure I paid extra for shipping the body -------------------- -Mike
mjcoury@gmail.com Team Reynolds Style Celica Blog Celica Wiki It will take him a moment to realize that he's about to make a 180 degree turn at speed, but you will be ready for it. Brace for the g's, and fast heel-toe work. |
|
Sep 19, 2012 - 7:15 PM
|
|
 Enthusiast Joined May 3, '11 From Ohio Currently Offline Reputation: 8 (100%) |
Any Chance a mkiii supra rear-end would fit?
--------------------  |
|
Sep 19, 2012 - 8:58 PM
|
|
|
Enthusiast Joined Sep 27, '10 From pittsburgh Currently Offline Reputation: 4 (100%) |
QUOTE (ricochet1490 @ Sep 19, 2012 - 8:15 PM) Any Chance a mkiii supra rear-end would fit? Probably not, i mean anything can fit... but not for the amount of effort i'd like to put in haha. No clue why it wouldnt run right....     
This post has been edited by czwalga: Sep 19, 2012 - 8:58 PM -------------------- -93 Rx7, Turbo 6.1L v8, 725rwhp/760rwtq
-95 Celica GT Rally Car - 3sge/AWD -10 F150 Always buying stock wheels... PM me if interested in selling. |
|
Sep 19, 2012 - 9:08 PM
|
|
|
Enthusiast Joined May 3, '11 From Ohio Currently Offline Reputation: 8 (100%) |
from v8 thread. Dunno if this helps. Page 3
QUOTE (pxcr440 @ Jun 3, 2012 - 9:42 PM) QUOTE (pipes @ Jun 3, 2012 - 4:51 PM) If you want/need a rear gt4 subframe.. Ihave one...great work looking at this makes me miss my car... Great work! I would have gone with the gt4 subframe and suspension but. Cost of those isnt cheap most i see are around a grand and strengh wise i would think the supra one would be stronger , also the actual parts available for the supra stuff. Makes it worth it to i have 200 in the donor car so price is right to me since i have to fabricate mounts anyways and the supra subframe is same width as rails on celica. ,,,atleast on the rear mounts -------------------- |
|
Sep 19, 2012 - 9:22 PM
|
|
 Enthusiast Joined Oct 29, '11 From Haltom City, Texas Currently Offline Reputation: 1 (100%) |
There arent aftermarket manufacturers of pinion bearings and ring gears?
I am disappoint... |
|
Sep 19, 2012 - 10:56 PM
|
|
 Enthusiast Joined Aug 23, '11 From kenton ohio Currently Offline Reputation: 14 (100%) |
Rav 4 has the same rear diff I do beleave
So you might be able the rob the parts from one of them -------------------- 95 gt coupe, v6 swap weekend toy
99 gt hatch beams swapped wife's 94 st hatch my daily driver http://www.6gc.net/forums/index.php?showtopic=82235  n |
|
Sep 20, 2012 - 8:22 AM
|
|
|
Enthusiast Joined Jun 18, '09 From Orlando Currently Offline Reputation: 8 (100%) |
That looks well borked...what's that called, driveshaft gear or something?
This post has been edited by SwissFerdi: Sep 20, 2012 - 8:23 AM -------------------- '97 ST \ Eibach \ KYB \ Kenwood \ Alpine \ Cusco \ OEM+ [sold 10/18]
'93 MX-5 LE |
|
Sep 20, 2012 - 9:28 AM
|
|
|
Enthusiast Joined Oct 29, '11 From Haltom City, Texas Currently Offline Reputation: 1 (100%) |
Its the pinion gear
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: August 18th, 2025 - 9:30 AM |