 Project Taurus, Engine ready |
 Nov 15, 2010 - 11:07 AM
|
 
|
 Enthusiast  Joined Nov 15, '10 From Austria Currently Offline Reputation: 1 (100%)  |
Hi,
today i decidet to login to your forum, my name is Alex i'am from austria and a glad ower of a ST205 since 2007, soon i began to build the car step by step to my specifications i'am afraid, i does not have good pictures from outside of the car, nearly 99% the fotos i have are from the engine bay or under the car (  just a few pics in the moment and i can upload more later ----- C-One Sports Air Filter, Samco, SARD & Earls Hoses HKS SSQV, Ultra Power Plug Wire, TRD Sport Oil Filter, Intercooler: TTE Group A Intercooler, TTE Group A Swirlpot, Jabsco Water Pump 80L/H, TRD 1,5Bar Radiator Caps Internals: Exhaust: Aussie Downpipe, Aussie Frontpipe, Competition Motorsport 200CPI Cat, Blitz Realize TT-R Backbox Engine Cooling: C-One Engine Cooling Panel, TRD Sports Thermostat, Samco Radiator Hose Kit, Custom Made Stainless Water Pipe (Radiator to Thermostat), Golpher 40mm Radiator, Spal Fans, SARD Breathing Tank, Custom Made Bonnet Air Escape Setrab Engine Oil Radiator, Setrab Gearbox Oil Radiator Fluids: Glysantin G30 1:1,5/Glysantin:Water with 2% Millers Extra Cool (Intercooler & Engine), ELF HTX825 10W60 Drivetrain: J Speed Braided Clutch Line, C-One Diff Cushion Brakes: Endless Super Street Y Sport Brake Pads, TAROX G88 Brake Rotors, J Speed Braided Brake Lines Suspension: C-One Stabilizer (Front & Rear), BC Racing BR Type Suspension Electronics: Defi Controll Unit, Defi Display (EGT, Oil Temp., Oil Press., Gearbox Temp.) Interior: C-One SR-X Steering Wheel, HKB Boss Kit Hub Adapter, Sparco TurinoII Security: C-One Mud Flaps, C-One Under Panel Wheels: Compomotive MO 6spoke, 8x18, 5x100, ET35, 225/35/18 (Tarmac) ST205 Facelift Wheels (Gravel) Look: Protocast Clear Front Repeaters, Toyota Clear Side Repeaters, Toyota Late Spec Rear Lights a gen.4 3S-GTE is in build -----  Uploaded with ImageShack.us  Uploaded with ImageShack.us feel free to drop me any question  greetz This post has been edited by Sunny: Sep 18, 2013 - 5:53 AM -------------------- KEEP COOL UNDER PRESSURE
 |
Posts in this topic
Sunny Project Taurus Nov 15, 2010 - 11:07 AM
Sunny Hi,
currently yes but we are testing a electrolyt... May 25, 2012 - 2:08 AM Sunny Hi,
took some time to polish and calculate the vo... Jun 4, 2012 - 11:30 AM Sunny Hi,
the engine arrives today
- 86,25mm piston... Jun 8, 2012 - 12:45 PM Sunny Hi,
calculated CR is 8,8:1
greetz Jun 10, 2012 - 6:04 AM Ted95 im patiently waiting to see this build complete, g... Jun 11, 2012 - 10:34 PM beams78 awesome dude its all shiny great job Jun 11, 2012 - 10:43 PM Sunny Hi,
thanks folks
the buttom is finished
i ... Jun 12, 2012 - 3:09 PM Sunny Hi,
lets have a look how much i can do this week,... Jun 25, 2012 - 6:33 AM Sunny Hi,
little modified fuel rail so that the injecto... Jun 26, 2012 - 12:47 PM Sunny Hi,
small update, the timing belt is mounted and ... Jul 17, 2012 - 11:39 AM SwissFerdi Gute arbeit, viel glück. Jul 17, 2012 - 4:25 PM Neon90424 amazing stuff sunny! Jul 17, 2012 - 7:26 PM Sunny Hi folks,
thanks, hope for a further update in th... Jul 18, 2012 - 6:37 PM Neon90424 damn spambots, what intercooler did u order sunny ... Jul 19, 2012 - 7:11 AM Sunny Hi neon,
i use a uprated TTE group A spec interco... Jul 19, 2012 - 7:24 AM SwissFerdi Assuming that's the name of your mechanic, I h... Jul 19, 2012 - 11:58 AM Sunny Hi,
thats me lol
greetz Jul 19, 2012 - 1:23 PM Sunny Hi,
a few more little bits are done
a M5 thermoc... Aug 4, 2012 - 4:37 PM Neon90424 sick sick build man! mucho respect! Aug 6, 2012 - 12:56 AM rave2n Ah I see that NSK bearing on the timing, I was uns... Aug 6, 2012 - 8:29 AM Sunny Hi,
you talk about that one next the tensioner? y... Aug 6, 2012 - 11:15 AM
rave2n QUOTE (Sunny @ Aug 6, 2012 - 11:15 A... Aug 6, 2012 - 11:24 AM Sunny Hi,
i also was a little bit scared, but then i fo... Aug 7, 2012 - 12:19 PM Sunny Hi,
another small step for me
mounted the fuel p... Aug 16, 2012 - 11:58 AM rave2n I must admit sir, your work is inspirational. Alwa... Aug 16, 2012 - 3:08 PM Sunny Hi,
omg, sir thats too much of compliment to me ... Aug 16, 2012 - 3:15 PM Sunny Hi,
instead of the engine i did some different wo... Sep 16, 2012 - 4:15 PM SupraKid I still maintain is this one of the best builds on... Sep 16, 2012 - 5:46 PM Ted95 QUOTE (SupraKid @ Sep 16, 2012 - 6:4... Sep 16, 2012 - 10:28 PM Sunny Hi,
slow but constant, thanks folks
greetz Sep 17, 2012 - 3:58 PM Sunny Hi,
the EFR is in house now
[url=http://www... Sep 23, 2012 - 3:26 AM RoyO Totally awesome! Good luck with the project an... Sep 24, 2012 - 5:41 AM Neon90424 finally got yours huh? isn't it amazing lol w... Sep 24, 2012 - 11:45 AM Sunny Hi,
thanks, it is the 6758 one, i think you use t... Sep 24, 2012 - 4:01 PM Ted95 thats what we've been waiting for! Sep 25, 2012 - 1:12 PM Sunny Hi,
another small step is done, we calculated the... Oct 16, 2012 - 1:24 PM Sunny Hi,
thanks to a friend, i was connected the FPR w... Oct 19, 2012 - 2:28 PM Sunny Hi,
if everything runs clear i will get the turbo... Nov 23, 2012 - 2:47 PM bsamps4 Sunny, would love your recipe for the full fuel/fu... Nov 23, 2012 - 6:43 PM Sunny Hi,
no problem, what question can i answer?
gree... Nov 25, 2012 - 9:59 AM Sunny Hi,
and tomorrow i will weld it to the mani... Nov 25, 2012 - 11:24 AM Sunny Hi,
the manifold is ready, the job was a little p... Nov 27, 2012 - 4:17 PM Sunny Hi,
and here the first mounting
hte new engi... Nov 28, 2012 - 8:43 AM bsamps4 Where did you buy the oil filter adapter and the g... Nov 28, 2012 - 11:48 AM Sunny Hi,
greedy usa
http://www.shopgreddy.com/access... Nov 28, 2012 - 1:14 PM Ted95 the build is looking sweet Sunny great work as alw... Nov 29, 2012 - 3:32 PM Neon90424 you sick sick man you!! looks awesome... ... Nov 29, 2012 - 5:41 PM Sunny Hi,
thanks folks, i will controll the boost with ... Dec 1, 2012 - 10:18 AM Sunny Hi,
der IC is raised 14mm to get space for the co... Dec 1, 2012 - 1:41 PM Sunny Hi,
two new pictures, the oil lines are done
AN4... Dec 8, 2012 - 1:29 PM Ted95 thats such a hard bend coming off the turbo wha... Dec 11, 2012 - 8:00 AM RoyO You did an amazing job again! Are you going to... Dec 11, 2012 - 8:38 AM Sunny Hi,
i will correct the angle later when i did a n... Dec 11, 2012 - 10:14 AM Sunny Hi,
hopefull the last revision to the fuel system... Dec 19, 2012 - 3:07 PM SupraKid Looks like you need to clock the turbo a bit more ... Dec 19, 2012 - 3:17 PM Sunny Hi,
like houdini
greetz Dec 20, 2012 - 6:06 PM Neon90424 Hey sunny what was the reason for the black top oi... Dec 31, 2012 - 6:45 PM Sunny Hi,
that pump has the highest oil flow
be carefu... Jan 1, 2013 - 2:52 PM Neon90424 and what rpm is that sunny? i don't really und... Jan 1, 2013 - 3:21 PM Sunny Hi,
8000rpm at 86mm stroke = 22,93m/sec
the part... Jan 2, 2013 - 9:09 AM Neon90424 I was going to use it on a 4th gen actually...the ... Jan 2, 2013 - 5:06 PM Sunny Hi,
got it, so she is nearly plug&oplay, you ... Jan 2, 2013 - 6:05 PM Neon90424 yeah that will be interesting...loong way to go I ... Jan 2, 2013 - 9:27 PM Ted95 Cam gears look great sunny! Which cams are you... Jan 2, 2013 - 11:37 PM Sunny Hi,
Catcam in belgium did some custom cams to my ... Jan 3, 2013 - 8:38 AM Ted95 QUOTE (Sunny @ Jan 3, 2013 - 8:38 AM... Jan 8, 2013 - 12:12 PM Neon90424 why not just 272 cams? Jan 3, 2013 - 2:16 PM Sunny Hi,
there are a few reasons,
- the cams effects ... Jan 3, 2013 - 4:08 PM Neon90424 do you still need the cam pos trigger with an afte... Jan 3, 2013 - 8:10 PM Sunny Hi,
yes, i'am in need of the sensor, without ... Jan 4, 2013 - 8:23 AM Neon90424 your ecu doesnt use a crank pos sensor? I had to m... Jan 4, 2013 - 9:27 AM Sunny Hi,
my ecu also needs the crank sensor, the gen.4... Jan 4, 2013 - 3:19 PM Hamburgler This is car porn and should be in a magazine haha.... Jan 6, 2013 - 5:08 PM Sunny Hi,
omg, thanks a lot
greetz Jan 7, 2013 - 9:37 AM Sunny Hi,
pretty nice appraised, max. touque from lates... Jan 8, 2013 - 5:27 PM Sunny Hi,
a small mod to the camgears, two holes and a ... Jan 16, 2013 - 7:56 AM Neon90424 Efr 7064 I think I might have the numbers wrong...... Jan 16, 2013 - 10:47 PM Sunny Hi,
thats the B2 frame which is twin entry availa... Jan 18, 2013 - 8:33 AM Sunny Hi,
yesterday the work goes on, i built the water... Jan 27, 2013 - 6:37 AM Sunny Hi,
today it goes on, nearly ready mounted setup ... Feb 23, 2013 - 7:15 PM Ted95 Awesome Sunny cant wait to see it, been a long tim... Feb 23, 2013 - 11:24 PM Sunny Hi Ted,
thanks, the targe is to start the drive i... Feb 25, 2013 - 12:01 PM Sunny Hi,
the IC pipework is done
and a correcte... Mar 6, 2013 - 2:46 PM Ted95 nicely done Sunny. The bend to the IC isnt as tigh... Mar 6, 2013 - 3:37 PM enderswift Motor looks fantastic. Good work Mar 6, 2013 - 4:49 PM Sunny Hi,
thanks folks
greetz Mar 7, 2013 - 12:01 PM Sunny Hi,
a further step is done
greetz Mar 15, 2013 - 6:17 PM Sunny Hi,
the next bracket is ready
haltech PS... Mar 21, 2013 - 10:44 AM bsamps4 Looking as professional as always good sir! Mar 26, 2013 - 8:23 AM Sunny Hi,
thanks a lot again mr. bsamps4
greetz Mar 26, 2013 - 10:29 AM rave2n Curious to how you got the turbo manifold, and exh... Mar 26, 2013 - 2:45 PM Sunny Hi
this isn't any magical, the manifold is a ... Mar 27, 2013 - 10:08 AM rave2n QUOTE (Sunny @ Mar 27, 2013 - 11:08 ... Mar 27, 2013 - 2:36 PM Sunny Hi,
me too, i was shooked decking the turbo adapt... Mar 27, 2013 - 3:09 PM Sunny Hi,
some work is done, nearly ready heatshield
... Apr 9, 2013 - 1:10 PM Ted95 Shield looks sickk Sunny what type of material is ... Apr 9, 2013 - 10:02 PM Sunny Hi Ted,
thanks, here we go
http://www.nimbusmoto... Apr 10, 2013 - 10:39 AM Sunny Hi,
and finished
greetz Apr 10, 2013 - 3:07 PM Sunny Hi,
update
today i will give the starter s... Apr 28, 2013 - 2:34 PM Sunny Hi,
ECU + subframe
hope to get the wiring tre... May 15, 2013 - 5:48 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: March 18th, 2026 - 11:09 AM |