Jan 19, 2011 - 10:55 AM
|
|
|
Enthusiast ![]() ![]() ![]() ![]() Joined Jan 19, '11 From Paraguay, Winchestertonfieldville Currently Offline Reputation: 1 (100%) |
I'll take advantage of this and say hello as this is my first post in this forum. I recently acquired a GT-Four from 1999 randomly traded my 2003 celica Gt JDM ofcourse was a neat ride but too low gas mileage was good beat the **** out of the car and of course... wrong wheel drive :S... So I kept driving past this pretty GT Four and I decided to check it out the next day... My cars underside was beat to hell ( rocky roads speed bumps carter looked like muhamed ali punched it) He said No mechanics or the deals always go sour, sure what the hell my car was beat to **** and ate cans of oil. I tested it and sure for me it was like driving a missile. So now the details, I liked that it had a nice thick Aluminum KOYO racing radiator and a Cusco alloy strut brace and a sweet japanese roundish air intake and 57K kilometers on the Odo...the limited 300km/h TRD speedo so I was turned on by this and the next day I was drivin this gas guzzler home...No surprise it had problems....
So the damage is this blown turbo seals no idea of what the engine condition is my intake manifold and everything else is covered inside with oil... I came to the US and bought basically 2 grand worth in parts didnt have that much money so I had to compromise, Heres the list, try not to cringe. Im basically gonna slap all this **** together and see if it works... GODSPEED KKR 480 Twin scroll turbo ( says its 450HP capable I'm aiming at 350) 4 Iridium spark plugs heat range 7 HKS SSQV black limited edition BOV AEM Water/Meth Inj 5 Gallon tank (our gas aint so purdi) Ebay oil catch can Timing belt set with new water pump (dont need the water pump but taking it as insurance anyways) ACT 6 puc clutch disk ( stock clutch slips a bit under high rev launching) crappy chinese AFR narrow band digital clockything (just so it tells me Im not melting pistons 25mm ebay wheel spacers ebay electronic boost controller ebay n1 carbon fiber burnt tip muffler electric exhaust cut out from Raceland USA carbon fiber raiser blocks from hong kong and the normal GT four wing for 40$ off a local supra guy. cheap 25$ bishieclipse FCD Ill try to update once I get to Paraguay and slap all this stuff on, Should be fun to see the results... Cheers This post has been edited by Neon90424: Sep 8, 2012 - 6:06 AM -------------------- |
Neon90424 GT-FOUR El Franjeado Jan 19, 2011 - 10:55 AM
Neon90424 . Apr 19, 2011 - 8:26 AM
Neon90424 I just ordered a BEE*R 2 stage Rev Limiter, should... May 11, 2011 - 4:52 PM
Culpable04 you just bought the wrong item,
this is to set y... May 11, 2011 - 9:12 PM
Neon90424 I know that, I bought for the launch control aka B... May 11, 2011 - 9:33 PM
delusionz unfortunately theres no way to override the rev li... May 12, 2011 - 5:43 AM
Neon90424 making the adapter took a very long time, infact i... May 12, 2011 - 1:10 PM
Neon90424 tiny update May 23, 2011 - 9:28 PM
Neon90424 BUIIILD IIS ALMOOST FINISHED!!!
My re... Jun 16, 2011 - 6:53 PM
Neon90424 I think that the oil catch can I bought is a bottl... Jun 18, 2011 - 9:11 PM
Neon90424 http://www.youtube.com/watch?v=YKYdqKrgLxA
here... Jun 19, 2011 - 1:03 PM
delusionz you definitely need to do a run with a wideband ki... Jun 20, 2011 - 9:41 AM
Neon90424 yeah I figure i should buy a wideband with gauge k... Jun 20, 2011 - 11:07 AM
Neon90424 Well I have ordered new cables, tomorrow I am orde... Jun 21, 2011 - 9:11 PM
Neon90424 Here's a vid hitting fuel cut in second gear..... Jun 23, 2011 - 7:49 PM
Neon90424 I just removed fuel cut and even boosted up to 23.... Jun 25, 2011 - 11:23 AM
cax_11 QUOTE (Neon90424 @ Jun 25, 2011 - 12... Jun 25, 2011 - 8:36 PM
presure2 you cracked a ringland, prolly in #2 or 3, thats w... Jun 26, 2011 - 9:09 AM
Neon90424 thanks for the input guys Is my car driveable in N... Jun 26, 2011 - 9:25 AM
Neon90424 Its going to be about 4400$ to get all this i... Jun 26, 2011 - 9:46 AM
3WayStunna Build isnt starting to seem so cheap anymore lol..... Jun 26, 2011 - 4:48 PM
Neon90424 I guess I'm going with the power FC due to the... Jun 26, 2011 - 9:16 PM
delusionz you should never have been running boost like that... Jun 27, 2011 - 12:39 AM
delusionz 20+ psi on a turbo like that running correctly it ... Jun 27, 2011 - 12:42 AM
cax_11 QUOTE (delusionz @ Jun 27, 2011 - 12... Jun 27, 2011 - 9:23 AM
Neon90424 You have quick spool, I have power from 4000-End o... Jun 27, 2011 - 6:00 PM
Neon90424 Ok this is kind of urgent...
I bought a head gask... Jun 28, 2011 - 9:57 AM
Neon90424 hey guys I have a problem I bought top feed injec... Jul 18, 2011 - 10:31 AM
Neon90424 I had a fuel rail made and adaptors so that it wil... Aug 7, 2011 - 12:22 AM
Neon90424 engine is being built as we speak ( or i speak to ... Aug 11, 2011 - 4:39 PM
Neon90424 got a used Power FC kit even with a turbo timer fo... Aug 15, 2011 - 2:19 PM
Neon90424 Just brought the car home, im breaking it in only ... Aug 18, 2011 - 5:59 PM
Neon90424 Forum Currency! = Pics!! Aug 19, 2011 - 10:12 AM
delusionz lookin good afroman!! Aug 20, 2011 - 8:31 PM
whatthe http://www.nengun.com/os-giken/racing-clut...in-pl... Aug 20, 2011 - 11:32 PM
Neon90424 Hahaha afroman isnt me thats the dude who does all... Aug 20, 2011 - 11:47 PM
Neon90424 Ok i have been boosting around 20 psi all day and ... Aug 24, 2011 - 10:28 PM
Neon90424 I am probably going with a Borg Warner EFR 6758 a ... Aug 25, 2011 - 7:20 AM
3WayStunna Just had to stop by and say those rims are nice ma... Aug 25, 2011 - 9:35 AM
Neon90424 They are Advan replicas! Advan Sugarray is wha... Aug 25, 2011 - 12:12 PM
Neon90424 For some reason my car was without a drop of water... Aug 26, 2011 - 6:14 PM
Neon90424 thanks for the input guys really appreciate it. Aug 27, 2011 - 9:41 PM
Nial Loving the car and the "budget" build.
... Aug 28, 2011 - 3:22 AM
Sunny Hi,
i also proved the EFR 6758 about he fit the 3... Aug 28, 2011 - 5:17 AM
Neon90424 I got a t25 manifold from ebay and hopefully it sh... Aug 28, 2011 - 9:02 AM
Neon90424 FUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUCK SHIIIIIIIIIIIII... Aug 29, 2011 - 10:15 PM
matts94celica Sorry for the loss bro, hopefully you can find ano... Aug 29, 2011 - 11:32 PM
Neon90424 found a complete 3sgte 96-99 no tranny with w2a t... Aug 30, 2011 - 6:20 PM
Neon90424 good news, engine didnt seize the timing belt and ... Sep 1, 2011 - 7:10 AM
Nial Lucky...kind of....at least the engines OK...did y... Sep 1, 2011 - 4:03 PM
Neon90424 I bought it but returned it, I have a kinda urgent... Sep 2, 2011 - 9:45 AM
Culpable04 you will need to grind a little bit on the head to... Sep 3, 2011 - 12:46 AM
Neon90424 thanks man I appreciate it! I will check into ... Sep 3, 2011 - 9:13 AM
Neon90424 manifold came for 2nd gen...Found a 3rd gen manifo... Sep 6, 2011 - 5:01 PM
Neon90424 0075 090911 2011-09-09 FIBERGLASS EXHAUST HEAD... Sep 10, 2011 - 5:59 PM
matts94celica You start getting parts in yet neon? Hopefully you... Sep 13, 2011 - 7:31 PM
Neon90424 I picked the parts up today!
Thermostat = 2n... Sep 13, 2011 - 9:11 PM
Neon90424 0740 091611 2011-09-16 BOSCH WIPER
0743 091... Sep 16, 2011 - 10:10 PM
bsamps4 I'm confused...How did it seize? "Driving... Sep 18, 2011 - 10:09 AM
Neon90424 It didnt seize, the timing belt snapped and it wra... Sep 18, 2011 - 10:18 AM
Neon90424 This thread is about to become ALIVEEE again Updat... Oct 22, 2011 - 8:52 AM
Neon90424 Small Update!
The head has been worked and p... Oct 27, 2011 - 8:15 AM
Neon90424 RE: GT-FOUR El Franjeado Oct 28, 2011 - 5:55 AM
Neon90424 projectors are in...
Engine , turbo and oil co... Nov 2, 2011 - 11:20 PM
Neon90424 having problems with the turbo touching the starte... Nov 3, 2011 - 3:09 PM
pitcelica Aren't you able to move the wastegate bracket ... Nov 3, 2011 - 4:11 PM
Neon90424 thanks pal yeah i thought of that but it only goes... Nov 3, 2011 - 6:15 PM
3WayStunna You cant just clock the turbo...i know they have a... Nov 4, 2011 - 9:33 AM
Neon90424 There is just no way...I can move it lower but tha... Nov 4, 2011 - 11:11 AM
Sunny Hi,
consider a cutom mounting plate for the actua... Nov 4, 2011 - 1:38 PM
3WayStunna You can clock it and repostion the wastegate...sta... Nov 4, 2011 - 1:52 PM
Neon90424 Yeah sunny Yesterday we agreed on a custom wastega... Nov 4, 2011 - 2:26 PM
Sunny Hi,
it is the best way i think too
one more thin... Nov 4, 2011 - 5:56 PM
Neon90424 Yeah sunny I wish I could follow your advice but ... Nov 4, 2011 - 7:53 PM
Sunny Hi,
the problem is that oil is heavier against ai... Nov 5, 2011 - 1:23 PM
Neon90424 Yeah I informed my mechanic about it and he unders... Nov 5, 2011 - 2:17 PM
Neon90424 HELP GUYs I have a problem with my fuel system, ap... Nov 16, 2011 - 1:47 PM
Neon90424 New pictures Nov 17, 2011 - 2:18 PM
Neon90424 http://s43.photobucket.com/albums/e380/xxN...nt=MO... Nov 21, 2011 - 9:35 PM
Neon90424 Awesome spool at idle!!
http://s43.photob... Nov 22, 2011 - 7:00 PM
jcaron9gt4 Sounds good! Nov 22, 2011 - 7:29 PM
Neon90424 QUOTE (jcaron9gt4 @ Nov 22, 2011 - 8... Nov 22, 2011 - 8:33 PM
pitcelica It looks like something is wrong with your boost g... Nov 22, 2011 - 7:58 PM
Neon90424 Nothing is wrong with the boost gauge, it is to a ... Nov 22, 2011 - 9:40 PM
Neon90424 http://s43.photobucket.com/albums/e380/xxN...rrent... Nov 23, 2011 - 9:01 PM
Neon90424 rear seat is out and new seats and 5 point harness... Nov 25, 2011 - 11:44 AM
Neon90424 I just got home guys, with all 5 gauges I believe ... Nov 25, 2011 - 7:39 PM
Neon90424 blew an oil hose today...stupid ebay hose... Nov 27, 2011 - 11:32 PM
Sunny Hi,
give me a feedback to the EFR turbo
what o... Dec 2, 2011 - 5:44 PM
Neon90424 the turbo is great, fitment is a bitch and it spoo... Dec 2, 2011 - 7:03 PM
Sunny Hi,
sounds great to me, when do you hit 1bar boos... Dec 3, 2011 - 6:36 AM
Neon90424 havent properly tuned the car and used it yet but ... Dec 3, 2011 - 7:55 AM
Sunny Hi,
that is great and makes the car very driveabl... Dec 3, 2011 - 9:07 AM
Neon90424 cant wait to read/see ur build man, I am going to ... Dec 3, 2011 - 12:06 PM
Sunny Hi,
1/4 mile
this isn't the correct rac... Dec 3, 2011 - 4:42 PM
Neon90424 so far in paraguay this is the first time we have ... Dec 3, 2011 - 6:56 PM
Sunny Hi,
i understand, so you need to know where you a... Dec 4, 2011 - 6:17 AM
Neon90424 max pressure? as in boost? no idea yet...I am wait... Dec 8, 2011 - 8:58 PM
Neon90424 Ordered
Rear CF Hatch
1200cc Injectors
ZEX Nitro... Dec 12, 2011 - 4:20 PM
3WayStunna Man those parts look like you spent a pretty penny... Dec 12, 2011 - 5:52 PM
bsamps4 Lookin forward to seeing what happens with this. B... Dec 12, 2011 - 8:27 PM![]() ![]() |
| Lo-Fi Version | Time is now: October 28th, 2025 - 12:59 PM |