Feb 13, 2011 - 5:19 PM
|
|
|
Enthusiast ![]() Joined Jan 10, '11 From Trail BC Currently Offline Reputation: 1 (100%) |
Here is a question that's driving me crazy with my build, and in general....
On the gt-4, is it ok 2 vent the BOV completly 2 atmosphere?? I ask this because I have noticed a lot of pics of st205s with a small hose that goes from the BOV into the airbox inlet, or aftermarket pipe that is designed for recirculation. Unfortunately when I received my swap, I did not get the airbox piece 2 connect my blitz dd 2....so I mounted it right off the IC outlet with a vacuum line on other end, as for my intake there are no hoses attached 2 it, just a big K&N filter on the end with a sensor after that in the intake tube. Is this ok 2 do, or should there be some recirculation from the BOV back into the intake??? And also the little black box that sits right behind the IC, that also shows a hose being plumbed into the intake, I just put a breather on that, is that a problem??? |
injection Blow-off air???? Feb 13, 2011 - 5:19 PM
Johnnyny recirculate if u vent u run rich Feb 13, 2011 - 8:54 PM
Neon90424 205's use a manifold pressure sensor venting i... Feb 13, 2011 - 9:33 PM
95celicastLSR check out turboxs hybrid BOV's they recirculat... Feb 13, 2011 - 10:17 PM
bsamps4 Josh, If you're concerned you could use a forg... Feb 13, 2011 - 10:23 PM
injection QUOTE (bsamps4 @ Feb 13, 2011 - 11:2... Feb 13, 2011 - 10:44 PM
95celicastLSR QUOTE (injection @ Feb 13, 2011 - 11... Feb 16, 2011 - 3:38 PM
schmooot There are two different IAT's. Assuming a 3rd... Feb 16, 2011 - 9:56 PM![]() ![]() |
| Lo-Fi Version | Time is now: January 11th, 2026 - 2:44 PM |