7A-FTE need info, on running oil line... Options

[doGGy]

Ok 7A-FTE guys, i need help from you, soon i will be the one like you Turbo is on the way to my engine... But i have few questions to ask... How did you run your Turbo oil feed lines??? From what place to take the feed line and there to return the oil return line??? If you can, please take photos, it would be much easyer for me to understand...

Big thanks to ya all.

[97sccelica]

we tee'ed into where the oil pressure sensor is.

it is located behind the alternator and a little to the right.

check the JGS tools site and look at the oil feed line kit for the 7afe to get an idea of it.

i should be getting my new turbo today so tomorrow after i take the old one off i will try to take some pics of the feed line.

oh, btw, you will need a pressure restrictor to lower the oil pressure that the turbo will be getting.

[zipstrips]

yea, NOS sells a restrictor fitting that fit my lines perfect.. and u need to drill it out 1/16...that size is quoted from corolla racing... i am not sure on the actual size i drilled mine out to thou... if u need help send me an IM.

This post has been edited by zipstrips: Dec 1, 2003 - 5:13 PM

[doGGy]

Thanks guys I already knew that i need the restrictor, i will make my self one with the size and hole that i need About info, i will always ask you

Our projects (my and Edo are both working on our engines) is moving in front with little steps Im going to use 4A-GZE pistons, take apart all the engine, balance crank, weight all the pistons with rods... make custom header (with equal as posible pipes)... I have a lot of work to do

Right now im looking for the Injectors and FPR.

Thanks again, and i will be waiting for the photos

[doGGy]

Any news guys????

[97sccelica]

[doGGy]