still no spark!, Help Please! Options

[injection]

Hello fellow 6th genres, question for all...did 3rd gen 3sgte swap ( st205 ), Dr Tweak did a great job on converting my harness to plug n play with my 94 GT ( 5sfe originally ) everything seems great turns over great and smell fuel....but no spark, checked to make sure these things are good:
Rotor turns,
Bought new cap n rotor, still nothing....switched back to old cap n rotor...nothing,
Tested wiring clips that plug to igniter....good ( power is there )
No spark from coil wire to cap
This wire reads 4.6 resistance ( seems like alot for an 11in wire )
While turning car over checked for spark from coil to wire....nothing,
Swapped igniter for my 5s one, they are same part #s n all....still nothing,
My last resort I believe is to test the coil somehow, considering no spark from coil to wire to cap, igniter has power going to it on both clips, and all grounds are in place...I heard something about a ground inside the distributer itself ( donknow )

If there is something I am missing and have not checked, please throw it out here, my last step is to test the coil today, im hoping it is dead because as far as i know this is my last resort!!!