 which rear rotor and pads should i choose? |
 Jul 10, 2011 - 3:50 PM
|
 
|
 Enthusiast  Joined May 4, '09 From coral springs florida US Currently Offline Reputation: 21 (100%)  |
Im doing a rear disc convertion and would like to upgrade the rotors to slotted and drilled and get good brake pads. I did some reserch but i couldnt get too much info on this.
While i do this swap i guess i dont have to change my proportioning valve because st and gt use the same ones correct? I know brake pads from 94-95 to 96-99 are different on a gt but rotors are different too? I saw this one what you think? If there are better ones for the same price or close let me know please. http://cgi.ebay.com/ebaymotors/Premium-Ser...=item5ae1634292 --------------------  |
Posts in this topic
diegohiga which rear rotor and pads should i choose? Jul 10, 2011 - 3:50 PM
Galcobar Before you buy, read this:
http://www.celicatech.c... Jul 10, 2011 - 8:23 PM
diegohiga QUOTE (Galcobar @ Jul 10, 2011 - 9:2... Jul 10, 2011 - 11:10 PM
diegohiga QUOTE (Galcobar @ Jul 10, 2011 - 9:2... Jul 10, 2011 - 11:14 PM Galcobar You might want to join, there's quite a bit of... Jul 11, 2011 - 2:02 AM Cuts_the_Pilot your fronts do most of the braking so for the rear... Jul 11, 2011 - 3:29 AM Neon90424 what about 315mm rotors for the Gt-4 where can i b... Jul 11, 2011 - 12:09 PM diegohiga QUOTE (Neon90424 @ Jul 11, 2011 - 1... Jul 11, 2011 - 1:09 PM Neon90424 I have 17" rims So it should fit, I also have... Jul 11, 2011 - 2:35 PM njccmd2002 the rear brakes were smaller for a reason, you don... Jul 11, 2011 - 7:32 PM Neon90424 I heard slotted rotors will eat the *^%@ out of yo... Jul 11, 2011 - 7:49 PM Cuts_the_Pilot Ive got slotted on my 205, they do increase the br... Jul 12, 2011 - 1:24 AM Neon90424 where did you get them? Jul 12, 2011 - 7:56 AM 3WayStunna Im not a big fan of slotted or drilled rotors at a... Jul 12, 2011 - 9:58 AM mak5603 I've said it before, I'll say it again. Br... Jul 12, 2011 - 11:20 AM 3WayStunna QUOTE (mak5603 @ Jul 12, 2011 - 11:2... Jul 12, 2011 - 5:27 PM diegohiga there is a rubber seal when you remove the spindle... Jul 12, 2011 - 11:47 PM Galcobar The O-ring between the hub and the knuckle? Not su... Jul 13, 2011 - 4:35 AM diegohiga QUOTE (Galcobar @ Jul 13, 2011 - 5:3... Jul 14, 2011 - 7:26 PM mak5603 Yep. Jul 14, 2011 - 7:32 PM diegohiga Are the rotors from gt and st the same? I search b... Jul 23, 2011 - 4:34 PM Tigawoods i have EBC slotted. they are great rotors, paired ... Jul 23, 2011 - 8:44 PM Euphoria EBC Ultimax are also awsome and don't bite you... Jul 24, 2011 - 9:58 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: October 25th, 2025 - 8:38 AM |