 installed new pioneer head unit w/ alpine speakers... need help |
 Oct 14, 2011 - 11:06 AM
|
 
|
|
Enthusiast  Joined Oct 29, '09 From Chicago Currently Offline Reputation: 2 (100%)  |
So I just installed the pioneer head unit that supports 50w per speaker and I got 4 alpine type r speakers that support a peak 600w per pair (1200w total) . And I hooked the unit up connected to the factory amp, which I'm thinking was not such a good idea. When I installed they two front speakers they sounded decent, but it seems like the rear speakers are barely letting sound out. At first I was thinking it was the speakers, but now I think the amp to the unit is distorting the signal for the speakers. Would it be better for me to replace the factory amp with a pioneer amp to get these alpines with better power and clarity or is the factory amp not a problem?
|
Posts in this topic
DIONYZUZ installed new pioneer head unit w/ alpine speakers... need help Oct 14, 2011 - 11:06 AM
njccmd2002 did u use the rca outs of your radio to the amp. ... Oct 16, 2011 - 7:47 AM
DIONYZUZ QUOTE (njccmd2002 @ Oct 16, 2011 - 7... Oct 16, 2011 - 4:52 PM pnoywitmustrdsauce bypass the factory amplifier located underneath ac... Oct 17, 2011 - 1:28 AM DIONYZUZ Yea... I ended up ordering a 4 channel pioneer amp... Oct 17, 2011 - 10:08 PM 99gt3sge So are you going to run new wires from amp to spea... Oct 24, 2011 - 12:13 AM DIONYZUZ QUOTE (99gt3sge @ Oct 24, 2011 - 12... Oct 25, 2011 - 10:42 AM trdproven if you are upgrading all the speakers but specific... Oct 24, 2011 - 8:14 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 21st, 2025 - 4:38 AM |