Nov 23, 2011 - 12:53 PM
|
|
|
Enthusiast ![]() ![]() Joined May 11, '09 From California Currently Offline Reputation: 4 (100%) |
I am usually really good about maintaining my Celica, but I decided that checking the damn dipstick was going to take too much time and ended up driving her 2.5 quarts low on a 200 miles round trip. . . 5 times. On the last trip the oil light flickered and I knew that I was going to have to check it out, but i was less than 10 miles from home so I thought I'd make it. Wrong. I heard a slight knocking but the engine was too loud and I couldn't figure where it was coming from, so I pushed the clutch in to drop the RPMs and quite the engine and the engine violently stalled as soon as I pushed the clutch in. I tried to turn her over while I was coasting but she wouldn't budge. I pulled off to the left, and tried to start her, it was like the battery was dead. Lights flickered, all lights on then slowly fade off. Finally she turned over and was knocking terribly. The knocking got worse as RPMs went higher so I shifted @2000RPMs and limped across the freeway got up to 45mph and pushed the clutch in to begin coasting and got another violent stall. I got to a rest stop coasting and only turned her on to show my dad and the tow truck driver the horrible noise. Haven't turned her on since and have looked up common problems. Spun bearing, messed up rod, messed up crank. I need some help with diagnosis and how to go about repairing this. Ill post pictures and remove whatever necessary. I have until Sunday to fix her, I can fix her, but I've never delved this deep into the engine and need some help. You guys haven't let me down yet, lets not start when I need it most. Thanks guys.
P.S. If we could refrain from commenting on the low oil. . . I'm not proud of my mistake but I know what I did wrong. . . I could go without the reminders. This post has been edited by DST94: Nov 23, 2011 - 12:55 PM -------------------- |
DST94 **7AFE Knocking** Help Revive her! Nov 23, 2011 - 12:53 PM
garin if you do tear down and rebuild make sure that you... Nov 23, 2011 - 1:00 PM
DST94 QUOTE (garin @ Nov 23, 2011 - 10:00 ... Nov 23, 2011 - 1:06 PM
stephen_lee you lost AT LEAST one bearing. and from the sound ... Nov 23, 2011 - 1:26 PM
DST94 QUOTE (stephen_lee @ Nov 23, 2011 - 10... Nov 23, 2011 - 1:34 PM
stephen_lee The engine is gone already so you can start it and... Nov 23, 2011 - 1:47 PM
DST94 Im going to drop the pan, Ill post in a bit with w... Nov 23, 2011 - 2:23 PM
DST94 Ok. I dropped the pan and everything, and there ar... Nov 24, 2011 - 12:56 AM
stephen_lee check the rod journals for scratches. if u can fee... Nov 24, 2011 - 10:20 AM
Smaay you are making more work for yourself. pull the en... Nov 28, 2011 - 2:47 PM
Smaay http://www.6gc.net/forums/index.php?showtopic=7250... Nov 28, 2011 - 2:58 PM
SupraKid Buy a new engine Devon. Nov 28, 2011 - 2:59 PM
bsamps4 I'm really sorry to hear about what happened. ... Nov 28, 2011 - 8:18 PM
stephen_lee LOL yeah, i suggested a used engine would be bette... Nov 28, 2011 - 8:46 PM![]() ![]() |
| Lo-Fi Version | Time is now: November 16th, 2025 - 2:57 PM |