![]() |
![]() ![]() |
![]() |
![]() |
|
Enthusiast Joined Sep 23, '08 From Lumberton, NC Currently Offline Reputation: 0 (0%) ![]() |
Hey folks. I have a 96 St (decently modified). Had somebody back into her parked in front of the house and mess up the fenders. I have since ordered and received some VIS fenders. Anyone know where I can get schematics or something detailing how to change them myself?
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Dec 26, '09 From Albuquerque, NM Currently Offline Reputation: 19 (100%) ![]() |
It's not too difficult. There a 3 bolts where the bumper meets the fender 4 or 5 on the top of the fender, a few in front/bottom of the wheel connecting the splash guard, a few behind/under it, 3 bolts along the wheel well also connecting the splash guard and one bolt behind the fender that you'll have to open your door and use a fairly long extension to get to. You may or may not need to remove the front bumper. I would, though.
This post has been edited by HectortheRican: Dec 3, 2011 - 2:43 PM -------------------- taking too long to mod since '09
June '12 COTM '95 AT200 |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Feb 15, '08 From Royal Oak, MI Currently Offline Reputation: 7 (100%) ![]() |
You have to remove bumper. Done it
-------------------- God made man....
Everything else... Made in China ![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Dec 26, '09 From Albuquerque, NM Currently Offline Reputation: 19 (100%) ![]() |
You have to remove bumper. Done it I have too, but I was replacing my bumper as well. Can't replace the bumper without removing it ![]() -------------------- taking too long to mod since '09
June '12 COTM '95 AT200 |
![]() |
|
Enthusiast Joined Sep 23, '08 From Lumberton, NC Currently Offline Reputation: 0 (0%) ![]() |
Thanks, guys. I was hoping to try getting it done on my Christmas break.
|
![]() ![]() |
Lo-Fi Version | Time is now: July 22nd, 2025 - 1:41 PM |