 project 1mz celica, 94 gt starting a new life |
 Jan 30, 2012 - 12:56 AM
|
 
|
 Enthusiast  Joined Aug 23, '11 From kenton ohio Currently Offline Reputation: 14 (100%)  |
So i desided. That since the swap isnt happening in the blue coupe anymore
i should make a new thread for the new celica So lets get to some pics   So this is the new one I just bought her off of dakotah( dakotahwatt) the 5s just let go an blew the rod on cly 1 so she was done an hes fed up so i jumped on buying her   Me an dakotah starting the tear down  Me removing the bumper  Us removing the radiator  The hole in the 5s block  starting to pull 5s    The 5s out an the 1mz setting behind waiting for a few more parts  Favorite pic the jackhandle going through the holecin the motor  Finally the empty engine bay  Pic of 1mz Hopefully alot more to come soon Orderin the clutch from southbend soon an ordering a stock flywheel tomorrow Sending the wiring harness out sometime next week Lookng at getting a aftermarket radiator Probably getting a new drivers axle too That should be the bulk of what i need to get her running Ive got around 1300 to get her on the road Lmk what you guys think -------------------- 95 gt coupe, v6 swap weekend toy
99 gt hatch beams swapped wife's 94 st hatch my daily driver http://www.6gc.net/forums/index.php?showtopic=82235  n |
Posts in this topic
kurt95gt project 1mz celica Jan 30, 2012 - 12:56 AM
mandrek oh ok.. is that thermo housing steel? Apr 9, 2012 - 4:16 PM kurt95gt Ill post a pic when its done its a peace of steel ... Apr 9, 2012 - 4:26 PM mandrek oh ok.. cool so an in-line tap then.. Apr 9, 2012 - 4:33 PM kurt95gt Yep just homemade cuz im cheap lol Apr 9, 2012 - 4:43 PM Box Glad you have the right ECU now. Apr 9, 2012 - 6:47 PM kurt95gt Yep as soon as i can find/afgord a set of headers
... Apr 9, 2012 - 6:56 PM kurt95gt Finally a working obd2 port!!!!... Apr 10, 2012 - 10:25 AM richee3 Awesome! What were they? I assume one was an O... Apr 10, 2012 - 12:35 PM kurt95gt Nope lol
Cam sensor
The auto trans( 2codes)
a a/... Apr 10, 2012 - 1:13 PM kurt95gt 3 of those is in the wiring
I have to move the ca... Apr 10, 2012 - 1:20 PM Box HOOORAY!!!! * Hallelujah song star... Apr 10, 2012 - 1:27 PM
kurt95gt QUOTE (Box @ Apr 10, 2012 - 2:27 PM)... Apr 10, 2012 - 1:45 PM Box Now you has 1MZ-FE power though. Apr 10, 2012 - 1:46 PM kurt95gt That is true but i still fear the sleeping monste... Apr 10, 2012 - 2:34 PM Box QUOTE (kurt95gt @ Apr 10, 2012 - 2:3... Apr 10, 2012 - 2:49 PM kurt95gt Shhhh your giving away all my plans lol Apr 10, 2012 - 3:05 PM Box QUOTE (kurt95gt @ Apr 10, 2012 - 3:0... Apr 10, 2012 - 5:02 PM mandrek you tried to goose it wile the cam sensor was givi... Apr 10, 2012 - 3:11 PM kurt95gt Yea i ran her alittle. Im sure the sensor caused t... Apr 10, 2012 - 3:34 PM Smaay what is the part number on your ECU? why are you u... Apr 10, 2012 - 4:14 PM kurt95gt The last 5# of the part number is 06331
The first... Apr 10, 2012 - 4:49 PM richee3 I'm surprised your car runs with the cam senso... Apr 10, 2012 - 5:19 PM Special_Edy QUOTE (richee3 @ Apr 10, 2012 - 6:19... Apr 11, 2012 - 3:16 PM kurt95gt Well we will find out in the am ill start with th... Apr 10, 2012 - 5:35 PM stephen_lee epic. Apr 11, 2012 - 1:28 PM kurt95gt QUOTE (stephen_lee @ Apr 11, 2012 - 2... Apr 11, 2012 - 2:25 PM kurt95gt Yep im guessing your right cuz she wont start if t... Apr 11, 2012 - 3:25 PM Smaay ^^^ yeah the ECU need crank position to fire the c... Apr 11, 2012 - 4:05 PM kurt95gt Well the cam code is now gone
I repinned it. Than... Apr 12, 2012 - 10:21 AM Special_Edy QUOTE (kurt95gt @ Apr 12, 2012 - 10... Apr 12, 2012 - 11:20 AM mandrek swEEEEEET! Apr 12, 2012 - 10:45 AM kurt95gt Well i talked to mr220v an hes said the trans code... Apr 12, 2012 - 1:09 PM kurt95gt Starting to hate this car lol
She seems to be run... Apr 12, 2012 - 1:17 PM Box Must be something that doesn't throw codes. I... Apr 12, 2012 - 1:49 PM kurt95gt Mr220v is thinking i need to repin the maf Apr 12, 2012 - 1:55 PM Special_Edy Fuel pressure, both at idle and while running, ign... Apr 12, 2012 - 1:57 PM kurt95gt The compression was good when it was check.
Ill h... Apr 12, 2012 - 1:59 PM Special_Edy QUOTE (kurt95gt @ Apr 12, 2012 - 1:5... Apr 12, 2012 - 2:15 PM Box Where's the damn automotive fairy when you nee... Apr 12, 2012 - 2:16 PM 95CelicaST ECU number is 89661-06331
EGR all hooked up? Or ... Apr 12, 2012 - 2:23 PM Smaay ^^^ the Solaras are supposed to do the same thing.... Apr 12, 2012 - 3:32 PM kurt95gt The camry/es300 is all the same
Ill post pics ton... Apr 12, 2012 - 3:56 PM kurt95gt The camry/es300 is all the same
Ill post pics ton... Apr 12, 2012 - 4:17 PM Special_Edy Or you could just chuck a junk tranny in the backs... Apr 12, 2012 - 6:48 PM Box Yeah, that might get him in trouble with the wifey... Apr 12, 2012 - 7:16 PM Special_Edy If there isnt then surely someone makes a chip you... Apr 12, 2012 - 7:21 PM richee3 What I've always seen done is using resistors ... Apr 12, 2012 - 7:41 PM kurt95gt Theres a plug i have to ground out a wire in to fi... Apr 12, 2012 - 7:42 PM kurt95gt Well i grounded out the plug an that didnt change ... Apr 13, 2012 - 1:08 PM 95CelicaST Okie Dokie. Apr 13, 2012 - 1:11 PM Smaay dang i hope i dont have all these problems Apr 14, 2012 - 1:04 AM kurt95gt Do yourself the favor an learn from my mistakes lo... Apr 14, 2012 - 1:22 AM Smaay just keep all that info handy, im sure ill need it... Apr 14, 2012 - 2:52 PM kurt95gt You might not run into some of the same problems t... Apr 14, 2012 - 3:19 PM Smaay did you change over to O2 sensors instead of AF se... Apr 14, 2012 - 3:31 PM kurt95gt No it still has all the stock sensors Apr 14, 2012 - 3:47 PM Smaay well that might be your problem. if you are using ... Apr 14, 2012 - 6:04 PM kurt95gt Im using a a/t ecu.
Honestly i didnt know there w... Apr 14, 2012 - 7:36 PM kurt95gt So after 2hours of searching google trying to figu... Apr 15, 2012 - 12:33 AM kurt95gt Ok after doing some looking i noticed that some of... Apr 15, 2012 - 12:21 PM kurt95gt So i finally let her run long enough to read a tem... Apr 15, 2012 - 4:10 PM kurt95gt Well i got the maf fixed but now if i try an go ov... Apr 16, 2012 - 11:08 AM Box Sorry to hear that. Hopefully it's the fuel ... Apr 16, 2012 - 1:02 PM kurt95gt Ok mr220v thinks if clean the maf an put a fuel pr... Apr 16, 2012 - 1:23 PM Special_Edy Its almost never one little thing. Always two or m... Apr 16, 2012 - 1:38 PM kurt95gt Idk about the top half of what you just said lol
... Apr 16, 2012 - 1:58 PM Special_Edy If you look at the real time data coming off the O... Apr 16, 2012 - 2:15 PM kurt95gt Well ill go buy some contact cleaner tomorrow an s... Apr 16, 2012 - 3:32 PM kurt95gt I know this is a super random question but could m... Apr 16, 2012 - 3:57 PM Special_Edy QUOTE (kurt95gt @ Apr 16, 2012 - 3:5... Apr 16, 2012 - 4:35 PM RabidTRD It's always fun to hold onto a bolt and have y... Apr 16, 2012 - 5:06 PM kurt95gt Ill do what i can of that stuff tonight an see wha... Apr 16, 2012 - 5:56 PM Smaay do you have the wiring diagram for the ECU you are... Apr 16, 2012 - 7:06 PM kurt95gt No i dont so far mr220v has sent me info as i need... Apr 16, 2012 - 7:18 PM Special_Edy Autozone rents a decent one for $200 maybe ... Apr 16, 2012 - 7:51 PM kurt95gt I got a friend that owns a used car lot that has 2... Apr 16, 2012 - 8:03 PM kurt95gt Well i cleaned the maf an put in a new pcv valve a... Apr 17, 2012 - 12:52 PM Special_Edy I would say that a manual transmission ECU could c... Apr 17, 2012 - 1:00 PM kurt95gt Im gonna try an figure out the speex sensor an tra... Apr 17, 2012 - 1:08 PM kurt95gt Well i got alittle more figured out with the help ... Apr 18, 2012 - 12:55 PM Special_Edy Are you getting an O2 sensor code. Lean on only on... Apr 18, 2012 - 1:19 PM kurt95gt No i didnt see an o2 sensor code
But come to thin... Apr 18, 2012 - 1:34 PM ricochet1490 ^I agree. A combination of scanner tool (purchase ... Apr 18, 2012 - 1:52 PM mandrek though i do not have experiences with this motor, ... Apr 18, 2012 - 3:24 PM Special_Edy QUOTE (mandrek @ Apr 18, 2012 - 3:24... Apr 18, 2012 - 5:58 PM richee3 It's interesting that you're getting a mis... Apr 18, 2012 - 5:55 PM kurt95gt Im going tomortow an gettong a new o2 sensor
An pr... Apr 18, 2012 - 7:21 PM kurt95gt Ok 96+ 1mz have wasted spark so it has. 3 coil pac... Apr 18, 2012 - 8:46 PM ricochet1490 if those cyl. are misfiring that bad, then the ext... Apr 18, 2012 - 10:38 PM kurt95gt I dont plan on doing much more till i get that reg... Apr 18, 2012 - 10:45 PM Box It is weird it's only misfiring on the odd cyl... Apr 18, 2012 - 11:17 PM kurt95gt Im glad you posted that cuz im just happen to thin... Apr 18, 2012 - 11:22 PM Box Hope it can be of help. You'll get it right s... Apr 18, 2012 - 11:27 PM kurt95gt I think at this point the best thing i can do is t... Apr 18, 2012 - 11:29 PM Box Skyrim is awesome. I can't believe I haven... Apr 18, 2012 - 11:46 PM 95CelicaST Did you not replace those items during the build?
... Apr 19, 2012 - 12:10 AM kurt95gt QUOTE (95CelicaST @ Apr 19, 2012 - 1... Apr 19, 2012 - 12:59 AM mandrek CLICKY!!!!! Apr 19, 2012 - 9:34 AM Special_Edy Those things always looked real cool but I would s... Apr 19, 2012 - 10:30 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: January 14th, 2026 - 1:29 PM |