 3SGTE not starting. |
 Mar 14, 2012 - 6:59 PM
|
 
|
 Enthusiast  Joined Nov 24, '07 From Tucson, Az Currently Offline Reputation: 2 (100%)  |
Hey everyone, so I am completely stumped now.
after fixing all my major oil water and timing problems, I go to start the car, and it just turns and turns and turns but doesn't actually run... I know my timing is correct. I've changed the coil wire out, the distro cap, and igniter. just to see if those could cause the problem. I test for spark and fuel, both are fine. I even put fuel into the intake and still nothing. also, I am sure I only unplugged the radiator. It would start like two weeks ago... I don't get it. does anyone have any Ideas?  I just want to get my car running again...Kevin This post has been edited by Soulend: Mar 14, 2012 - 7:07 PM |
Posts in this topic
Soulend 3SGTE not starting. Mar 14, 2012 - 6:59 PM
lagos Is your igniter and coil bolted to the firewall?
... Mar 14, 2012 - 7:13 PM Soulend I know for a fact about the igniter and coil are b... Mar 14, 2012 - 8:15 PM Bitter engine flooded with fuel? Pull the plugs, dry then... Mar 14, 2012 - 8:26 PM lagos QUOTE (Soulend @ Mar 14, 2012 - 9:15... Mar 14, 2012 - 10:09 PM
Soulend QUOTE (lagos @ Mar 14, 2012 - 8:09 P... Mar 15, 2012 - 2:02 AM Bitter SO you have spark, you have injector power and gro... Mar 15, 2012 - 7:45 AM Soulend QUOTE (Bitter @ Mar 15, 2012 - 5:45 ... Mar 15, 2012 - 6:23 PM enderswift did you run a compression test? Mar 15, 2012 - 8:47 PM lagos If the car ran before and you did the timing belt,... Mar 15, 2012 - 11:05 PM Soulend Whelp, redid the timing, it wasn't 180 out I t... Mar 17, 2012 - 4:39 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 22nd, 2025 - 1:28 PM |