 Turn signal question |
 Jul 13, 2012 - 10:12 PM
|
 
|
|
Enthusiast Joined Jul 13, '12 From CA Currently Offline Reputation: 0 (0%)  |
Hey guys, my 96 ST turn signal has a rapid clicking sound, but I checked the bulb and it was good (I just replaced all the bulbs) and the only problem I see is that the wires leading to the bulb had been cut (on accident?) and retied off with electrical tape. The passenger side looks the same, but they function perfectly.
Could it be the wiring that is bad? The two cut wires are a green and white one and a solid green one. It was working fine a couple days ago, but I don't know what could have happened in a span of two days to cause the issue. TL;DR: turn signal (driver) won't work, replaced bulb, wires had previously been cut but tied off with electrical tape. Passenger side works and it was also cut/tied off as well. Thanks for any input! |
Posts in this topic
flavorjunction Turn signal question Jul 13, 2012 - 10:12 PM
trdproven didnt really understand...but are you saying all t... Jul 14, 2012 - 7:17 AM Timmyface ^ to add to that. When one of my turn signals blew... Jul 16, 2012 - 6:26 AM mkernz22 get pictures of the wiring Jul 16, 2012 - 9:22 AM flavorjunction I just checked the wiring - its blackish. Primaril... Jul 16, 2012 - 11:20 AM mkernz22 All I know is that there are 3 wires. One is a gro... Jul 17, 2012 - 11:41 AM xs94st hmm Jul 18, 2012 - 11:15 PM
flavorjunction I repaired the wire, and there was no effect.
Ha... Jul 19, 2012 - 1:16 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: July 16th, 2025 - 3:45 PM |