![]() |
![]() |
![]() |
|
Enthusiast ![]() Joined Mar 1, '12 From New York Currently Offline Reputation: 0 (0%) ![]() |
Hey guys, so my boot on my front right cv joint ripped. The cv joint is still good as far as I know because it is not clunking at all when I turn sharp right or left. I bought the 2 piece replacement boot that does not need any disassembly to install, but after further looking at how it worked, I decided that it was garbage and returned it. So now I am stuck taking the axle out to put my new boot on. I just wanted to know how to take the axle out. For those who have done it before I would greatly appreciate any advice for the job, because I want to get this done ASAP before the CV joint goes bad.
|
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 2, '05 From Guam Currently Offline Reputation: 15 (100%) ![]() |
Just try the search or stickies first. Heres some reference on how to remove the axle, if you cannot get this far or understand it, I wouldn't do it yourself at least have a friend over thats done axles before.
http://www.6gc.net/forums/index.php?showto...2;cv+axle\ -------------------- 94 Celica GT
|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi| |Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto| |Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr8 04 Celica GT |Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy| |
![]() ![]() |
Lo-Fi Version | Time is now: July 24th, 2025 - 6:14 AM |