Jul 5, 2012 - 1:24 PM
|
|
|
Enthusiast ![]() Joined Sep 22, '10 From pomona, ca Currently Offline Reputation: 1 (100%) |
hey whats up guys, once again i have ran into another issue. this past weekend i was doing some tuning on my car and i wanted to UP the boost a little bit more, but to my surprise i cant go past 11psi......
i did another boost leak test and my intercooler pipes( inlet to outlet) hold 15psi without trouble and the pressure stays pretty steady....so no mo major leaks there... i got a cheap MBC when the MBC is closed i boost 7spi which is the wastegate spring load MBC half way open = 11psi fully open = 11psi if i remove the boost controller and leave the hose that connects to it by itself, still get 11psi............. so i im assuming i must have a leak somewhere past the throttle body...im not sure how to test the intake manifold and all other vac lines to see if i got a leak there under pressure, because in idling i sprayed starting fluid around injectors, manifold, ects. and idle didnt change. or is it possible that my EGR could be leaking??? any help is appreciated |
batcavee00 Can't Boost past 11psi Jul 5, 2012 - 1:24 PM
batcavee00 C'mon guys, im sure somebody knows how to truo... Jul 6, 2012 - 1:37 PM
Syaoran How do you know you're boosting 11 PSI?
Boos... Jul 6, 2012 - 5:22 PM
Smaay you are flirting with disaster at that high a boos... Jul 6, 2012 - 6:52 PM
batcavee00 I got no signs of detonation, or knock wat so eve... Jul 6, 2012 - 8:21 PM
Syaoran QUOTE (batcavee00 @ Jul 6, 2012 - 9... Jul 6, 2012 - 8:29 PM
batcavee00 The booost gauge is still pretty new. If it was ba... Jul 6, 2012 - 11:51 PM
delusionz what turbo? wastegate door being blown open? Jul 7, 2012 - 1:49 AM
Smaay it could be the exhaust. it might be too restricti... Jul 7, 2012 - 2:54 AM
malecrod Sounds like wastegate problem. It might be stuck o... Jul 7, 2012 - 8:46 AM
batcavee00 i think i found my problem, i was checking the car... Jul 9, 2012 - 2:00 PM
batcavee00 So, I fixed the leak on the throttle and still hav... Jul 16, 2012 - 9:19 AM
easternpiro1 did you ever find the issue? im begining to think ... Aug 1, 2012 - 10:00 PM
batcavee00 it turns out it was my wastegate arm. it was some ... Aug 2, 2012 - 11:41 AM
easternpiro1 thats good to hear!! i checked my wastegat... Aug 2, 2012 - 7:11 PM![]() ![]() |
| Lo-Fi Version | Time is now: December 8th, 2025 - 12:54 AM |