Sway bar polyurethane bushings

Sway bar polyurethane bushings, Anyone found some that fit our old celicas??

Nov 29, 2011 - 7:34 PM
samir0189 View Member Profile Enthusiast Joined Mar 8, '08 From Orlando, Florida Currently Offline Reputation: 14 (100%)	I have searched, and searched. No clear answer as to the size of our stock sway bars, but I seem to see that they may be F: 18mm and R: 16mm, can this be confirmed? Also, I see that the brand Prothane makes universal poly bushings. I hope you can see where I'm going with this. Will these fit? or is the length measurement off? Or Can anyone direct me to some that are known to fit? I would measure my bushings but they are disintegrated pretty badly to the point I am not sure I would get a proper measurement. Worst case scenario, I buy squishy OEM rubber replacements. FRONT 18mm REAR 16mm -------------------- ◊◊◊ My F/S Thread! ◊◊◊ QUOTE (14:19:21) Daniel: That was a JDM hole in the side of the box too. There was so much JDM trapped inside that box that they couldn't contain it, so they had to put a JDM hole in the box to let the JDM out. QUOTE Ferdi says (11:29) No, it looks like a hooker put her acid vag on your hood. Acid vag = bigger problem than a few dings.

Posts in this topic

samir0189 Sway bar polyurethane bushings Nov 29, 2011 - 7:34 PM

RabidTRD Energy Suspension makes a set that fit perfectly. ... Dec 3, 2011 - 12:46 PM

RabidTRD OK, part number that fits perfect from Energy Susp... Dec 3, 2011 - 10:31 PM

easternpiro1 good stuff, from what i hear this is a great inves... Dec 4, 2011 - 1:14 AM

samir0189 QUOTE (RabidTRD @ Dec 3, 2011 - 10:3... Dec 4, 2011 - 9:29 AM

easternpiro1 QUOTE (samir0189 @ Dec 4, 2011 - 10... Dec 4, 2011 - 7:56 PM

samir0189 The front sway bar on my car is 20mm. I will look ... Dec 4, 2011 - 3:50 PM

samir0189 Seems like the part number for the front would be ... Dec 4, 2011 - 6:14 PM

richee3 I'm tempted to replace several bushings in my ... Dec 4, 2011 - 10:20 PM

Malhar95 how much do these cost avg.? im not tracking or sw... Dec 5, 2011 - 12:58 AM

samir0189 QUOTE (easternpiro1 @ Dec 4, 2011 - 7... Dec 5, 2011 - 1:52 PM

RabidTRD One thing I will suggest, and highly recommend doi... Dec 8, 2011 - 5:09 PM

samir0189 I received the bushings today actually. I'll p... Dec 8, 2011 - 5:44 PM

RabidTRD I'd say to take a piece of sand paper and wrap... Dec 8, 2011 - 7:57 PM

samir0189 Well. They were a bit of a pain to install, yes. O... Dec 10, 2011 - 7:26 PM

RabidTRD Omg your bars have absolutely no rust on them at a... Dec 10, 2011 - 11:17 PM

Ted95 nice work! anxious to hear how the car rides w... Dec 12, 2011 - 11:09 PM

samir0189 QUOTE (RabidTRD @ Dec 10, 2011 - 11... Dec 14, 2011 - 12:20 PM

SupraKid Samir why did you get red bushings appose to black... Dec 14, 2011 - 10:29 PM

RabidTRD Do the colors really make a difference? I got blac... Dec 15, 2011 - 7:17 AM

SwissFerdi $35 you say, huh? I may has to invest in thes... Dec 15, 2011 - 8:16 AM

Spider77 QUOTE (SwissFerdi @ Dec 15, 2011 - 9... Dec 28, 2011 - 8:17 PM

samir0189 @andrew - 1. Didn't know the color made a diff... Dec 15, 2011 - 10:20 AM

SupraKid The more lube the better I always say. Dec 15, 2011 - 12:52 PM

RabidTRD Omg lmao! So then I could have run my black o... Dec 18, 2011 - 1:22 PM

mkernz22 ebay! http://www.ebay.com/itm/CELICA-ST202-ST... Dec 20, 2011 - 3:09 PM

SupraKid uhm...Kern those are more expensive.. Dec 20, 2011 - 3:42 PM

mkernz22 i know, but it's still another option Dec 20, 2011 - 5:36 PM

SupraKid Will be installing my set and kirk mounts tomorrow... Dec 28, 2011 - 9:27 PM

stephen_lee GT and ST have different sized sway bars IIRC. Dec 29, 2011 - 9:56 AM

doctavic QUOTE (stephen_lee @ Dec 29, 2011 - 10... Nov 20, 2012 - 11:37 PM

SupraKid These things are SWEEEEEEETTTTTTT. Definitely a di... Dec 31, 2011 - 10:06 PM

Ted95 QUOTE (SupraKid @ Dec 31, 2011 - 10... Dec 31, 2011 - 11:43 PM

SupraKid Yea and I got the black ones. With lube they go on... Jan 1, 2012 - 2:38 AM

Ted95 QUOTE (SupraKid @ Jan 1, 2012 - 2:38... Jan 1, 2012 - 12:53 PM

RabidTRD QUOTE (SupraKid @ Jan 1, 2012 - 2:38... Jan 2, 2012 - 1:15 PM

RoyO Anyone installed these? http://www.ebay.com/itm/ST... Jan 1, 2012 - 4:56 PM

SupraKid *Couch cough searchyoumuthafugginnoob cough cough*... Jan 1, 2012 - 5:26 PM

RoyO QUOTE (SupraKid @ Jan 2, 2012 - 12:2... Jan 2, 2012 - 3:09 AM

Spider77 Ordered a set......on an off topic, amyone try the... Feb 25, 2012 - 8:01 PM

Spider77 Rear sway bar for a GT is 17mm (according to my ol... Mar 6, 2012 - 2:30 PM

SupraKid My thoughts exactly about the 7th gen short shifte... Mar 6, 2012 - 3:59 PM

jordisonjr Has anyone used these sway bar bushings: http://ww... Apr 1, 2012 - 11:34 AM

mkernz22 QUOTE (jordisonjr @ Apr 1, 2012 - 12... Apr 4, 2012 - 10:12 AM

jordisonjr ohhhh haha my bad. did you end up getting these? o... Apr 4, 2012 - 12:43 PM

jordisonjr Do you have to jack up the car to replace the rear... Apr 21, 2012 - 4:19 PM

trdproven just following up on this thread, is it confirmed ... Apr 27, 2012 - 6:54 PM

trdproven Im guessing the fronts need 20mm bushings and best... Apr 30, 2012 - 5:28 PM

Spider77 QUOTE (trdproven @ Apr 30, 2012 - 6... Apr 30, 2012 - 7:15 PM

jordisonjr I just put in the 16mm on the rear, with the brack... Apr 30, 2012 - 8:59 PM

trdproven did the ES bushings change the feel from a daily d... Apr 30, 2012 - 10:43 PM

jordisonjr I wasn't able to finish installing them yet. I... Apr 30, 2012 - 11:31 PM

Syaoran PROPER SIZES for a GT (ST204): 20mm front, 17mm re... Nov 21, 2012 - 12:53 AM

doctavic 16 it is for me then (AT200), thank you Syaoran...... Nov 21, 2012 - 7:11 AM

Syaoran QUOTE (doctavic @ Nov 21, 2012 - 8:1... Nov 21, 2012 - 2:58 PM

doctavic QUOTE (Syaoran @ Nov 21, 2012 - 2:58... Nov 29, 2012 - 5:45 PM

RabidTRD I own a ST204 and have 16mm rear bars. Nov 22, 2012 - 1:55 PM

Syaoran QUOTE (RabidTRD @ Nov 22, 2012 - 2:5... Nov 23, 2012 - 2:35 PM

BillyM81 My black 94 gt and my yellow parts car both have 1... Nov 23, 2012 - 3:39 PM

RabidTRD My GT is a 94. It never had a gap on the bushing. ... Nov 24, 2012 - 10:28 PM

delusionz you guys have 20mm front??? what the hell!... Nov 26, 2012 - 10:46 PM

BonzaiCelica QUOTE (delusionz @ Nov 26, 2012 - 11... Nov 27, 2012 - 1:18 PM

delusionz i wonder if the front bar from an st204 would fit ... Nov 27, 2012 - 3:38 PM

Syaoran AWD cars are similar to FWD cars in that they tend... Nov 28, 2012 - 2:59 AM

delusionz ISH! the rear swaybar will lift the outter wh... Nov 28, 2012 - 2:47 PM

SwissFerdi Having the rear dampers harder for more traction m... Nov 28, 2012 - 3:05 PM

Syaoran Stiffer springs in the rear help to both improve t... Nov 28, 2012 - 3:30 PM

BonzaiCelica it is very possible to fit the st204 sway bar on s... Nov 29, 2012 - 3:07 AM

jordisonjr Torching a sway bar, and bending it to fit seems l... Nov 29, 2012 - 2:06 PM

RabidTRD Is anyone else having crazy loud creak noises? Did... Nov 30, 2012 - 9:50 PM

Galcobar QUOTE (RabidTRD @ Nov 30, 2012 - 7:5... Dec 1, 2012 - 11:00 AM

SwissFerdi Rubbing on the frame somewhere, I bet. Nov 30, 2012 - 11:03 PM

jordisonjr ^ This. Dec 1, 2012 - 3:45 PM

richee3 I've had mine on for around 7-10k miles now an... Dec 1, 2012 - 11:34 PM

Galcobar QUOTE (richee3 @ Dec 1, 2012 - 9:34 ... Dec 3, 2012 - 6:41 AM

BonzaiCelica i had a annoying creak on teh front sway bars, but... Dec 2, 2012 - 2:44 AM

RabidTRD I've lubed the hell out of them... I used the ... Dec 4, 2012 - 2:57 PM

Galcobar I relube mine about that, but I suspect that's... Dec 4, 2012 - 6:47 PM

« Next Oldest · Suspension/Handling/Braking · Next Newest »

1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)

0 Members:

6G Celicas Forums