Oct 8, 2012 - 9:24 PM
|
|
|
Enthusiast ![]() ![]() ![]() Joined Feb 14, '09 From Mid West Currently Offline Reputation: 7 (100%) |
After doing fender & bumper cover replacement, the right fender bulb went out. No biggie--got new 194 bulbs & replaced both.
On the way home from work, I noticed the temp got higher than it normally gets. Here's the deal-- Only have 1 fan that a PO had wired to the ignition, so it always come on when I start the Celica. Get home from& checked the fan-- nope, not running! Here is my Q-- I don't have access to a millimeter, I do have the thing that lights up when it gets power. What wire(s) should I test? Did NOT get over heated. Checking fuses when I get home tomorrow night. Tips & advice Greatly Appreciated!!! Thanks |
Bigblock Cooling fan Oct 8, 2012 - 9:24 PM
soulshadow If its hooked up directly to 12V and it doesn... Oct 8, 2012 - 10:37 PM
Bigblock Thanks for the reply soulshadow!
I'll loo... Oct 9, 2012 - 5:12 AM
zfjohnson07 just run a wire to your battery to see if it even ... Oct 9, 2012 - 4:13 PM
Bigblock How the heck do I unplug the connector that's ... Oct 9, 2012 - 9:50 PM
Bigblock Fan motor is dead!
Thanks for the help!... Oct 10, 2012 - 4:03 PM![]() ![]() |
| Lo-Fi Version | Time is now: October 26th, 2025 - 5:45 PM |