 just curious, Brake hardware |
 Oct 17, 2012 - 12:33 AM
|
 
|
|
Enthusiast  Joined Jun 25, '08 From CA Currently Offline Reputation: 0 (0%)  |
im just curious, I've done my brakes several times and recently they started making this loud creaking noise while moving at slow speeds and applying the brakes. After inspecting them I found one of the guide bolt pins was sticking badly. so after replacing them all and putting some fresh anti-seize they've stopped making that noise. well any ways my question is just how often should those guide pins be replaced? Usually i'll use the retainer clips and those V-shaped springs through maybe 2 sets of pads but I've never replaced the pins before now and my Celica is just shy of 250K miles.
|
Posts in this topic
RavenAegis45 just curious Oct 17, 2012 - 12:33 AM
Galcobar Depends upon use, conditions, maintenance and luck... Oct 17, 2012 - 9:34 PM 199celica Not to burst your bubble but I've hadd bad cas... Oct 17, 2012 - 10:51 PM Galcobar Ack, I missed that. Don't use anti-seize on th... Oct 18, 2012 - 3:35 AM celica74 Only grease where the caliper hits the pad and the... Oct 18, 2012 - 9:25 AM
RavenAegis45 I see, thats good to know, its worth noting that t... Oct 18, 2012 - 1:26 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: August 24th, 2025 - 8:53 AM |