 Idle Stability/Vacuum WTF????, Little insight here please |
 Nov 12, 2012 - 7:17 PM
|
 
|
|
Enthusiast  Joined May 16, '10 From Raleigh Currently Offline Reputation: 12 (100%)  |
]Check out this video. My idle bumps just like the vacuum between 550-700rpms. It does this after the car has fully warmed up. Cold start the vacuum and idle hold firm until the engine gets up to operational temperature.
Things I\'ve done: full boost leak test, and repaired the leaks I found. smoke test, and repaired the leaks I found. My question?....what else could cause this? Sticking IACV maybe???? oh yea...it\'s a 3rd gen 3sgte. Fully built...etc...most of you are probably familiar with my build. If not it\'s in the my project section. http://s1190.beta.photobucket.com/user/bsa...403873.mp4.html 
This post has been edited by bsamps4: Nov 12, 2012 - 7:18 PM --------------------  |
Posts in this topic
bsamps4 Idle Stability/Vacuum WTF???? Nov 12, 2012 - 7:17 PM
delusionz yeah thats very normal, it happens from time to ti... Nov 12, 2012 - 7:32 PM bsamps4 Good advise. I will double check the timing., but ... Nov 12, 2012 - 8:02 PM MotoFoo86 With your idle that low it's no suprise it... Nov 12, 2012 - 9:47 PM bsamps4 Id love for it to idle right, but what options do ... Nov 13, 2012 - 9:23 AM Smaay for sure clean out the IAC for starters. Nov 14, 2012 - 10:08 AM bsamps4 Does the IAC affect idle even after warm up? Nov 14, 2012 - 2:52 PM enderswift Check the map sensor. My idle went to crap after I... Nov 14, 2012 - 11:03 PM delusionz thats not an idle adjustment screw, thats a thrott... Nov 14, 2012 - 11:44 PM delusionz the IACV is plenty big to run fast idle up to 2000... Nov 14, 2012 - 11:48 PM
bsamps4 Yes, I have polyurethane mounts. I actually discon... Nov 15, 2012 - 10:45 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: July 20th, 2025 - 2:20 PM |