 Spacer size |
 Feb 20, 2012 - 6:10 PM
|
 
|
|
Enthusiast  Joined Sep 11, '08 From Surrey Unitedkingdom Currently Offline Reputation: 1 (100%)  |
Hi all, done a lot of reading on this forum and its been a great help with my conversion. ST202 convertible with 3rd gen 3SGTE and ST185 gearbox with MR2 Turbo box bellhousing - because I got both very cheap and the MR2 box had LSD too. Engine and box are in the car and is all running well, but I've heard that one of the axle can pop out and a spacer in needed to be machined from a old axle. I have the part needed But how thick should the spacer be made? What bolts can I then use as the std bolts will not be long enough? |
Posts in this topic
jeffrosie Spacer size Feb 20, 2012 - 6:10 PM
jeffrosie anybody
really need help here guys
I know tha... Feb 22, 2012 - 4:30 PM diegohiga same here.. i couldnt find anything...i only see p... Dec 28, 2012 - 12:11 PM richee3 As far as I can tell, it's a 1/2" spacer.... Dec 28, 2012 - 1:24 PM
Smaay you know funny thing, i have an E153 trans in my c... Dec 29, 2012 - 7:18 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: August 22nd, 2025 - 2:31 PM |