![]() |
![]() |
![]() |
|
Enthusiast ![]() ![]() Joined Sep 6, '12 From Holland Currently Offline Reputation: 1 (100%) ![]() |
Hello,
I'm busy with swapping the blacktop engine in my car. Today i compared both the airco compressors and the body size from both is about 15 cm (5,9055 inch). Only the pulley is another size. I prefer using the comp from the 7AFE because i know for sure that one is 100% good and the pipes on my Celica will not fit the 4AGE comp without bending the lines. Do you know if it's possible to swap just the pulley? And if so, how can we do this? Thanks! -------------------- |
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Dec 8, '03 From Lancaster CA Currently Offline Reputation: 6 (100%) ![]() |
yes, well i did it on my swap. the compressor is the same just the hose connections and pulleys were different. i swapped them over and all good
-------------------- 2001 Celica GT-S Turbo
1997 Supra TT 6speed 1997 Celica 3MZ/1MZ swap 1990 Celica All-Trac |
![]() |
|
Enthusiast ![]() ![]() Joined Sep 6, '12 From Holland Currently Offline Reputation: 1 (100%) ![]() |
yes, well i did it on my swap. the compressor is the same just the hose connections and pulleys were different. i swapped them over and all good Thanks! That is great news. I know how to disassembly the pulley already so i'm going to use my 'old' aircon compressor. -------------------- |
![]() ![]() |
Lo-Fi Version | Time is now: July 26th, 2025 - 2:08 AM |