Sep 26, 2014 - 4:27 AM
|
|
![]() Enthusiast ![]() ![]() Joined Apr 21, '13 From YYC Currently Offline Reputation: 1 (100%) |
I installed a Kenwood KDC-BT858U deck this past summer and use the bluetooth on it along with my Galaxy S3 to play music. I first noticed the symptoms when I flashed my high-beams, and it occurred randomly when I flashed. The sound would be normal, and when I flashed, sometimes it would stay normal, sometimes it would BLARE the volume to the point of distortion. Now that it's pretty much winter season here (rain for 6 months), I've been using my rear wipers more, and I figured out tonight that when my rear wipers are on auto, the sound will blare randomly as well.
All I need to fix the sound from BLARING DISTORTION to regular volume is to pause the music for a few seconds, then unpause it again. I'm not quite sure whether it could be a short somewhere in the wiring since I didn't splice into the steering column stalks, and it's happening over bluetooth. I haven't yet tried whether these symptoms happen if I'm listening to the radio or CD (I'll try tomorrow). My soldering skills aren't 100%, but I'll have to check that I properly sealed my splices as well when I get a chance to rip apart my console. Any thoughts? |
Jeebus Bluetooth sound + rear windshield wiper = random BLARING sound Sep 26, 2014 - 4:27 AM
Bitter Does it have a physical line in you can try? does ... Sep 27, 2014 - 3:39 PM
Jeebus It does not happen when I use the radio/CD player ... Oct 3, 2014 - 5:12 PM
igpx12 Sounds like your bluetooth receiver is close enoug... Oct 3, 2014 - 6:28 PM
Jeebus QUOTE (igpx12 @ Oct 3, 2014 - 6:28 P... Oct 6, 2014 - 8:07 PM![]() ![]() |
| Lo-Fi Version | Time is now: October 24th, 2025 - 8:18 PM |