 Curren splitter problem! |
  |
 Mar 14, 2014 - 2:53 PM
|
 
|
|
Enthusiast  Joined Apr 25, '13 Currently Offline Reputation: 0 (0%)  |
Hey guys I got a hold of curren tail lights and Curren bumper splitters, the front fit with no problem, the rears though, the bolts match up on the fender, it will sit flush if I press against it but if I do not, it has a big gap.... I tried the tape it does not work, but also on the splitters the metal piece on the inside it does not line up with my bumper bolt what so ever so I am not sure what the hell is up I have a 99 vert btw.
|
|
Mar 14, 2014 - 3:26 PM
|
|
 Enthusiast Joined Mar 8, '12 From Hanford/Fresno, Ca Currently Offline Reputation: 20 (100%) |
post pics. There are rear curren splitters which fits coupes/verte and there are the gt4 ones which fits hatchbacks. You mightve got a hatch set by accident.
-------------------- |
|
Mar 14, 2014 - 3:38 PM
|
|
|
Enthusiast Joined Apr 25, '13 Currently Offline Reputation: 0 (0%) |
QUOTE (chris32880 @ Mar 14, 2014 - 3:53 PM)  Hey guys I got a hold of curren tail lights and Curren bumper splitters, the front fit with no problem, the rears though, the bolts match up on the fender, it will sit flush if I press against it but if I do not, it has a big gap.... I tried the tape it does not work, but also on the splitters the metal piece on the inside it does not line up with my bumper bolt what so ever so I am not sure what the hell is up I have a 99 vert btw. They came off a curren they're flush when I press against it no tape or molding was used |
|
Mar 14, 2014 - 3:53 PM
|
|
|
Enthusiast Joined Mar 8, '12 From Hanford/Fresno, Ca Currently Offline Reputation: 20 (100%) |
Did the seller have the actual pics of it mounted on the Curren? A lot of sellers on eBay dont know the difference. Only one seller knows because I notified him and gave him measurements before I bought the hatch splitters off of him.
-------------------- |
|
Mar 14, 2014 - 4:04 PM
|
|
|
Enthusiast Joined Mar 8, '12 From Hanford/Fresno, Ca Currently Offline Reputation: 20 (100%) |
-------------------- |
|
Mar 14, 2014 - 4:28 PM
|
|
|
Enthusiast Joined Apr 25, '13 Currently Offline Reputation: 0 (0%) |
about 22 inches measured
|
|
Mar 14, 2014 - 5:48 PM
|
|
 Enthusiast Joined Feb 2, '07 From Berlin, WI Currently Offline Reputation: 18 (100%) |
are these authentic or fiberglass?
could just be warped. if you push it and it forms well then just use some double sided tape to hold it. --------------------  *1997 Celica ST - 3SGE Greytop BEAMS *1977 Celica RA29 - Classic Cruiser *2005 Matrix AWD - dedded but still hanging around like a ghost 2019 Rav4 XLE Premium - Sports mode is fun. |
|
Mar 15, 2014 - 8:15 AM
|
|
|
Enthusiast Joined Apr 25, '13 Currently Offline Reputation: 0 (0%) |
Authentic curren splitters did not use tape and heat to mold so my problem is fixed
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: June 19th, 2025 - 4:05 PM |