 wiring 12v sockets. |
 Apr 12, 2014 - 11:11 AM
|
 
|
 Enthusiast  Joined Jun 24, '12 From Birmingham Currently Offline Reputation: 1 (100%)  |
back again with a quick Q.
iv ordered a couple of these 12v sockets for the car  and will be installing them both in the blank spot here  my question is where would be the best/easiest place to get power for these without causing interference or problems to the rest of the car? need the power to switch on/off when the car switches on/off my cig lighter socket has been disabled as i am currently running my heated seats AND my floor well leds from the cig lighter wiring and dont want to wire anything else towards that side so wont consider that an option. im also going to be using wago blocks to rewire anything i cut into as i cant be bothered to solder anything and T taps are crap. any help would me much appreciated. --------------------  "whoever said progress was a slow process... was probably talking about me" |
Posts in this topic
MisterRay wiring 12v sockets. Apr 12, 2014 - 11:11 AM
The_enD Run a single wire from your battery. Your chassis ... Apr 12, 2014 - 12:21 PM
MisterRay QUOTE (The_enD @ Apr 12, 2014 - 1:21... Apr 12, 2014 - 12:48 PM The_enD Just wire to the cig lighter, worst thing that cou... Apr 12, 2014 - 12:55 PM MisterRay QUOTE (The_enD @ Apr 12, 2014 - 1:55... Apr 12, 2014 - 5:06 PM The_enD You got a bunch of wires in the kick panel, for th... Apr 12, 2014 - 5:10 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: July 27th, 2025 - 12:37 PM |