 e153 Trans into 6gc |
 Apr 3, 2015 - 3:44 PM
|
 
|
|
Enthusiast  Joined Mar 18, '15 From iowa Currently Offline Reputation: 0 (0%)  |
Ok. Since my transmission on my 97 Celica ST has started going out, I have decided to go 3sgte.
I will be using E153 Trans from mr2. The axles are most confusing to me. I know to use the ST185 outer with MR2 turbo inner. My question is... Which joint do I do the splice? the inner of the axles or the outer joint of the axles? Which axle do I use the actual shaft from? I have seen the write up on "How To" convert to FWD and looks pretty straight forward. Every thread I have come across just stated to use mr2 inner and ST185 outer. Thank you guys in advance. |
Posts in this topic
krzkon e153 Trans into 6gc Apr 3, 2015 - 3:44 PM
Batman722 Lots of info here
http://www.6gc.net/forums/index... Apr 3, 2015 - 5:58 PM Smaay just get a Camry E153. you obviously dont know wha... Apr 3, 2015 - 8:06 PM krzkon Thanks Batman and Smay for the info.
I never have... Apr 6, 2015 - 8:37 AM
Smaay ok, good luck with that. Apr 12, 2015 - 6:22 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: October 24th, 2025 - 3:49 AM |