 need help to tighten my valve lash |
 May 1, 2015 - 3:49 PM
|
 
|
 Enthusiast  Joined Jun 21, '14 From Ottawa, Ontario, Canada Currently Offline Reputation: 0 (0%)  |
My head is off. I have purchased delta cams 264 weld and grind. The guy at Delta said I have to adjust my valves and tighten the lash. He says 0.006 thou on the intake and 0.008 on the exhaust side. He said I have to either lap the valves more or grind the valve stems to compensate for the difference. My new valves are .015 -.005 thou short.
Should I bolt the cams onto the head or can I just rest them on top and check the clearance between the lifters and the cam lobes? Will I need to remove the valve springs? I'm doing this all backwards, I just spent two hours putting the valve springs back in with needle nose pliers. Is there another way?? -------------------- |
Posts in this topic
doory100 need help to tighten my valve lash May 1, 2015 - 3:49 PM
blasphemy101 I'm confused; do you have too much clearance, ... May 1, 2015 - 5:04 PM Smaay actually lapping the valves does. it grinds away t... May 1, 2015 - 8:46 PM doory100 I haven't done anything yet but my valves are ... May 2, 2015 - 5:52 AM doory100 I made some stainless steel 0.005" shims to h... May 4, 2015 - 4:01 PM Bitter Well there you go! Looks like you've got i... May 4, 2015 - 7:27 PM Smaay do not use those!!!! that will ra... May 4, 2015 - 9:46 PM Bitter Build smart, build Smaay smart. May 4, 2015 - 11:26 PM doory100 I was contemplating that myself... I also have mad... May 5, 2015 - 3:54 PM
Smaay QUOTE (doory100 @ May 5, 2015 - 1:54... May 5, 2015 - 5:26 PM doory100 Do they sell thicker shims? are there different mo... May 5, 2015 - 5:55 PM Bitter The dealer sells shims, you measure the clearance,... May 5, 2015 - 6:44 PM doory100 thanks homie May 5, 2015 - 7:17 PM doory100 I found out that the 1zz and 2zz corolla motors ha... May 6, 2015 - 1:43 PM Bitter ok but they may not be the right thicknesses, you ... May 7, 2015 - 9:06 PM Smaay QUOTE (doory100 @ May 6, 2015 - 11:4... May 7, 2015 - 10:01 PM doory100 Im just sticking with my shims and lapping the val... May 9, 2015 - 6:48 AM Smaay i hope you are not using those shims you made. im ... May 9, 2015 - 9:48 PM doory100 yes mum... May 10, 2015 - 1:11 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: September 16th, 2025 - 7:22 PM |